Motordrev RCA TI24 iC60 3P/4 poler 230 V AC fjern genindkobling, <500ms 1W B:63 mm
| Varenr: | A9C70124 |
| El nr: | 3322079020 |
| EAN13 nr: | 3606480097973 |
| Pakning: | 1stk |
 |
| [Ui] rated insulation voltage | 400 V |
| [Uimp] rated impulse withstand voltage | 6 kV |
| [Us] rated supply voltage | 230 V AC 50/60 Hz |
| 9 mm pitches | 7 |
| Ambient air temperature for operation | -25...60 °C |
| Ambient air temperature for storage | -40...70 °C |
| Colour | White |
| Comb busbar distribution block compatibility | NO |
| Control type | Remote control maintained Ti24 24 V DC Remote control impulse and maintained 230 V AC 50/60 Hz |
| Depth | 75.5 mm |
| Device short name | RCA iC60 |
| Electrical durability | 10000 cycles |
| Height | 93 mm |
| Impulse duration | >= 200 ms control circuit |
| Input current | 5.5 mA maintained very low voltage 5 mA maintained 5 mA impulse |
| IP degree of protection | IP20 conforming to IEC 60529 |
| Local signalling | Flashing orange LED: not operational Flashing green LED: ready to operate |
| Mechanical durability | 10000 cycles |
| Mounting mode | Fixed |
| Mounting support | DIN rail |
| Overvoltage category | II |
| Period | 18 months |
| Physical interface | Ti24 |
| Pollution degree | 3 conforming to IEC 60947 |
| Product compatibility | PLC IC60 3P IC60 4P IMDU |
| Product or component type | Remote control auxiliary |
| Product weight | 0.43 kg |
| Provision for padlocking | Padlockable |
| Relative humidity | 93 % at 40 °C |
| Signal contacts composition | 1 SD Ti24 1 OF Ti24 1 OF volt-free contacts |
| Signalling circuit voltage | Ti24 24 V 100 mA DC Volt-free contact 24...230 V 0.01…1 A AC |
| Tightening torque | Auxiliary input: 1 N.m Auxiliary output: 0.7 N.m Auxiliary supply: 1 N.m |
| Tropicalisation | 2 |
| Value of setting | Position B :reclosing inhibited after tripping Position A :reclosing authorized after tripping Mode 3 :central control and local override Mode 1 :central control Off :remote control inhibited Auto :remote control authorized |
| Width | 63 mm |
| Wire stripping length | Ti24 interface: 10 mm (terminal) Output: 8 mm (top) Input: 10 mm (bottom) Power supply: 10 mm (bottom) |
Yderliger oplysninger:
Se venligst SE katalog©Schneider Electric A/S 2025
