 |
[Us] rated supply voltage | 208...690 V (- 15...10 %) |
Afkølingsmåde | Natural convection |
Ambient air temperature for operation | -10...40 °C uden reducering > 40...60 °C with current derating of 2 % per °C |
Ambient air temperature for storage | -25...70 °C |
Analog udgangstype | (AO) current output 0-20 mA eller 4-20 mA <= 500 Ohm |
Antal digitale udgange | 2 |
Anvendes til | Asynchronous motors |
Beskyttelsestype | Thermal protection (starter) Thermal protection (Motor) Fase fejl (linie) |
Bredde | 160 mm |
Communication data link | Seriel |
Control circuit consumption | 30 W |
Digital indgangslogik | (Stop, Run, LI3, LI4) positiv logik tilstand 0 < 5 V og < 2 mA, tilstand 1 > 11 V og > 5 mA |
Digital indgangsnummer | 5 |
Digital indgangsspænding | 24 V (<= 30 V) |
Digital indgangstype | (Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm PTC, 750 Ohm på 25 °C |
Digital udgangstype | (R3) relay outputs motor powered No (R2) relay outputs end of starting relay No (R1) relay outputs fault relay No (LO2) logic output 0 V common configurable (LO1) logic output 0 V common configurable |
Driftshøjde | > 1000...2000 m with current derating of 2.2 % per additional 100 m <= 1000 m without derating |
Driftsstilling | Vertical +/- 10 degree |
Dybde | 190 mm |
EAN-nummer | 3389110982213 |
Effekttab i W | 74 W for standard applikationer 59 W for standard applikationer |
Electromagnetisk kompatibilitet | Voltage/current impulse i henhold til IEC 61000-4-5 Level 3 Immunity to radiated radio-electrical interference i henhold til IEC 61000-4-3 Level 3 Immunity to electrical transients i henhold til IEC 61000-4-4 level 4 Electrostatic discharge i henhold til |
Fabriksindstillet strøm | 21 A |
Forbindelsestype | 1 RJ45 |
Forsyningsspændingsgrænser | 177...759 V |
Forureningsgrad | Level 3 i henhold til IEC 60664-1 |
Function available | External bypass (optional) |
Fysisk interface | RS485 multidrop |
Højde | 275 mm |
IcL starter rating | 22 A for standard applikationer 17 A for standard applikationer |
Installaeret udstyr | 31 |
IP kapslingsklasse | 18-22 |
Kommerciel status | Commercialised |
Lagerkode | Ikke på lager |
Minimum sluttestrøm | Relay outputs 10 mA på 6 V DC |
Mærkning | CE |
Netfrekvensgrænse | 47.5...63 Hz |
Maximum sluttestrøm | Relay outputs 1.8 A på 30 V DC inductiv belastning, cos phi = 0.5, L/R = 20 ms Relay outputs 1.8 A på 230 V AC inductiv belastning, cos phi = 0.5, L/R = 20 ms Logic output 0.2 A på 30 V DC |
Motoreffekt i hp | 7.5 hp på 230 V for standard applikationer 5 hp på 230 V for severe applications 5 hp på 208 V for standard applikationer 3 hp på 208 V for severe applications 20 hp på 575 V for standard applikationer 15 hp på 575 V for severe applications 15 hp på 460 V |
Motoreffekt i kW | 5.5 kW på 230 V for standard applikationer 18.5 kW på 690 V for standard applikationer 7.5 kW på 440 V for severe applications 7.5 kW på 400 V for severe applications 9 kW på 525 V for severe applications 9 kW på 500 V for severe applications 4 kW på 230 |
Output absolute accuracy precision | +/- 5 % |
Productcertificeringer | CCC CSA C-Tick DNV GOST NOM 117 SEPRO TCF UL |
Produktsortiment | Altistart 48 |
Produktspecifik applikation | Pumping and ventilation machine Severe and standard applications |
Produkttype | Soft starter |
Protokol for kommunikationsport | Modbus |
Relativ fugtighed | <= 95 % uden kondens eller vand i henhold til EN/IEC 60068-2-3 |
Sammenbygningens type | With heat sink |
Shockmodstand | 15 gn til 11 ms i henhold til EN/IEC 60068-2-27 |
Standarder | EN/IEC 60947-4-2 |
Startmåde | Start with torque control (current limited to 5 In) |
Styrespænding | 110 - 15 % til 230 + 10 %, 50/60 Hz |
Supply inrush current | Justerbar 0.4...1.3 Icl |
Tilslutningsfrekvens | 50...60 Hz (- 5...5 %) |
Transmissionsstørrelse | 4800, 9600 or 19200 bps |
Type nr. | ATS48 |
Utilisation category | AC-53A |
Vibrationsmodstand | 1.5 mm (f = 2...13 Hz) i henhold til EN/IEC 60068-2-6 1 gn (f = 13...200 Hz) i henhold til EN/IEC 60068-2-6 |
Vægt | 4.9 kg |