 |
[Us] rated supply voltage | 200...240 V (- 15...10 %) |
Accellerations- og nedreguleringsrampe | Linear from 0 to 999.9 s S U |
Ambient air temperature for operation | 40...60 °C with current derating 2.2 % per °C -10...40 °C med protective cover from the top of the drive removed |
Ambient air temperature for storage | -25...70 °C |
Analog indgangstype | AI1 configurable voltage 0...5 V, impedans 30 kOhm AI1 configurable voltage 0...10 V, impedans 30 kOhm AI1 configurable current 0...20 mA, impedans 250 Ohm |
Analog udgangstype | (AO1) software-configurable current, analog output 0...20 mA, output impedans 800 Ohm, analog output opløsing 8 bits (AO1) software-configurable voltage, analog output 0...10 V, output impedans 470 Ohm, analog output opløsing 8 bits |
Analoge Indgange | 1 |
Analoge udgange | 1 |
Antal adresser | 1...247 til Modbus |
Antal digitale udgange | 2 |
Antal pr. Sæt | Sæt af 1 |
Anvendes til | Asynchronous motors |
Asynkron motorkontrol | Quadratic voltage/frequency ratio Sensorless flux vector control Voltage/frequency ratio (V/f) |
Bredde | 72 mm |
Bremsemoment | Up to 70 % of nominal motor torque without braking resistor Up to 150 % of nominal motor torque with braking resistor at high inertia |
Beskyttelsestype | Thermal motor protection via the drive by continuous calculation of I²t Against input phase loss in three-phase Short-circuit between motor phases Over varme beskyttelse Overcurrent between output phases and earth Line supply undervoltage Line supply over |
Bremsning ved stilstand | Med DC indsprøjtning, 0.1...30 s |
Digital indgangslogik | Positive logic (source), 0...< 5 V (tilstand 0), > 11 V (tilstand 1) Negative logic (sink), > 16 V (tilstand 0), < 10 V (tilstand 1), input impedans 3.5 kOhm |
Digital indgangsnummer | 4 |
Digital indgangstype | (LI1...LI4) programmering, 24 V, spændingsgrænser 18...30 V |
Digital udgangstype | (R1A, R1B, R1C) protected relay output 1 C/O (LO+, LO-) logic output |
Driftshøjde | <= 1000 m without derating > 1000...2000 m with current derating 1 % per 100 m |
Driftsstilling | Vertical +/- 10 degree |
Dybde | 121.2 mm |
EAN-nummer | 3606480071058 |
Electromagnetisk kompatibilitet | Voltage dips and interruptions immunity test i henhold til EN/IEC 61000-4-11 Surge immunity test (Level 3) i henhold til EN/IEC 61000-4-5 Radiated radio-frequency electromagnetic field immunity test (Level 3) i henhold til EN/IEC 61000-4-3 Immunity to con |
Elektrisk tilslutning | L1, L2, L3, U, V, W, PA, PC terminal 3.5 mm² (AWG 12) |
Elektromagnetisk stråling | Conducted emissions with additional EMC filter, klasse: miljø 2 kategori C3 i henhold til EN/IEC 61800-3 - testniveau: 4...12 kHz, <= 50 m shielded motor cable Conducted emissions with additional EMC filter, klasse: miljø 1 kategori C2 i henhold til EN/IE |
EMC filter | Integrated |
Faseantal | Enkel faset |
Forsyning | Internal supply for logic inputs 24 V DC, spændingsgrænser 20.4...28.8 V, 100 mA til overload and short-circuit protection Internal supply for reference potentiometer 5 V DC, spændingsgrænser 4.75...5.25 V, 10 mA til overload and short-circuit protection |
Frekens | 4...16 kHz with derating factor 2...16 kHz Justerbar |
Functionality | Basic |
Fysisk interface | 2-wire RS 485 til Modbus |
Hastighedsområde | 1...20 |
Hyppig beslutning | Display enhed 0.1 Hz Analog indgang converter A/D, 10 bits |
Højde | 143 mm |
Indbygget ventilator | Uden |
IP kapslingsklasse | 18-22 without blanking plate on upper part |
Isolation | Electrical between power and control |
Klemmetype | 1 RJ45 til Modbus on front face |
Kommerciel status | Commercialised |
Kommunikationsfunktioner | Read device identification (43) Read/write multiple registers (23), beskeder: 4/4 ord maksimum Write multiple registers (16), beskeder: 27 ord maksimum Write single register (06), beskeder: 29 ord maksimum Read holding registers (03), beskeder: 29 ord mak |
Lagerkode | På lager |
Linearitetsfejl | +/- 0.3 % af maksimum værdi til analog indgang |
Maximum sluttestrøm | 4 Aved 30 V DC modstandsdygtig belastning cos phi = 1 L/R = 0 ms til logic relay 3 Aved 250 V AC modstandsdygtig belastning cos phi = 1 L/R = 0 ms til logic relay 2 Aved 30 V DC inductiv belastning cos phi = 0.4 L/R = 7 ms til logic relay 2 Aved 250 V AC |
Maximum transient current | 3.6 A til 60 s |
Minimum sluttestrøm | 5 mAved 24 V DC til logic relay |
Motor slip compensation | Justerbar Fabriksindstilllinger |
Motoreffekt i hp | 0.55 hp |
Motoreffekt i kW | 0.37 kW |
Mærkning | CE |
Nominal switching frequency | 4 kHz |
Product end of life instructions | Available Download Bortskaffelsesmanual |
Product environmental profile | Tilgængelig Download Produktmiljøprofil |
Productcertificeringer | CSA C-Tick GOST NOM UL |
Produktsortiment | Altivar 12 |
Produktspecifik applikation | Simple machine |
Produkttype | Frekvensomformer |
Prospektiv kortslutningsstrøm Isc | <= 1 kA |
Protokol for kommunikationsport | Modbus |
Prøvevarighed | < 10 ms til analog indgang < 20 ms, tolerance +/- 1 ms til logic input |
REACh | Reference contains SVHC above the threshold - Go to CaP for more details |
Relativ fugtighed | 5...95 % without dripping water i henhold til IEC 60068-2-3 5...95 % without condensation i henhold til IEC 60068-2-3 |
RoHS (date code: YYWW) | Compliant - since 0901 - Schneider Electric declaration of conformity |
Sammenbygningens type | With heat sink |
Shockmodstand | 15 gn til 11 ms i henhold til EN/IEC 60068-2-27 |
Specific application | Other applications Centrifugal pumps and fans |
Speed drive output frequency | 0.5...400 Hz |
Støjgrænse | 0 dB |
Sustainable offer status | Green Premium produkt |
Tidskonstant | 20 ms, tolerance +/- 1 ms for reference change |
Tilgangsstrøm | 4.9 Aved 240 V 5.9 Aved 200 V |
Tilslutningsfrekvens | 50/60 Hz (+/- 5 %) |
Tilspændingsmoment | 0.8 N.m |
Transient overmoment | 150...170 % of nominal motor torque depending on drive rating and type of motor |
Transmissionsstel | RTU til Modbus |
Transmissionsstørrelse | 38400 bit/s 19200 bit/s 9600 bit/s 4800 bit/s |
Type nr. | ATV12 |
Udgangsspænding | 200...240 V tre faset |
Vedvarende udgangsstrøm | 2.4 Aved 4 kHz |
Vibrationsmodstand | 1.5 mm peak to peak (f = 3...13 Hz) drive unmounted on symmetrical DIN rail i henhold til EN/IEC 60068-2-6 1 gn (f = 13...200 Hz) i henhold til EN/IEC 60068-2-6 |
Vægt | 0.7 kg |