 |
| [Us] rated supply voltage | 380...480 V (- 15...10 %) |
| Accellerations- og nedreguleringsrampe | Automatic based on the load Linear adjustable separately from 0.01 to 3200 s |
| Accuracy | +/- 1 % (FM) for a temperature variation 60 °C +/- 0.6 % (VIB) for a temperature variation 60 °C +/- 0.6 % (VIA) for a temperature variation 60 °C |
| Adskillelse | Electrical between power and control |
| Ambient air temperature for operation | > 40...50 °C with derating factor -10...40 °C uden derating |
| Ambient air temperature for storage | -25...70 °C |
| Analog indgangstype | Configurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bits Kontakt-konfigureret strøm: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bits Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bits Co |
| Analog udgangstype | Kontakt-konfigureret strøm: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bits |
| Analoge Indgange | 2 |
| Analoge udgange | 1 |
| Antal adresser | 1...247 |
| Antal digitale udgange | 2 |
| Anvendes til | Asynchronous motors |
| Asynkron motorkontrol | Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) |
| Beskyttelsestype | With PTC probes for Motor Motor fase brud for Motor Thermal protection for Motor Imod løs fase for køre Line supply undervoltage for køre Line supply overvoltage and undervoltage for køre Imod overskridende maks. Hastighed for køre Break on the control ci |
| Bredde | 215 mm |
| Bremsning ved stilstand | Med DC indsprøjtning |
| Dataformat | 8 bits, 1 stop, odd even or no configurable parity |
| Dielektrisk gennemslagsholdbarhed | 5092 V DC between control and power terminals 3535 V DC between earth and power terminals |
| Digital indgangslogik | Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1) Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1) |
| Digital indgangstype | Programmering (RES) 24 V DC, with level 1 PLC - 4700 Ohm Programmering (R) 24 V DC, with level 1 PLC - 4700 Ohm Programmering (F) 24 V DC, with level 1 PLC - 4700 Ohm |
| Digital udgangstype | Configurable relay logic: (RY, RC) No - 100000 cycles Configurable relay logic: (FLB, FLC) NC - 100000 cycles Configurable relay logic: (FLA, FLC) No - 100000 cycles |
| Driftshøjde | 1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m <= 1000 m without derating |
| Driftsstilling | Vertical +/- 10 degree |
| Dybde | 192 mm |
| Elektrisk tilslutning | Terminal 6 mm2 / AWG 10 (L1/R, L2/S, L3/T) Terminal 2.5 mm² / AWG 14 (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) |
| EMC filter | Class C2 EMC filter integrated |
| Enhedens korte navn | ATV212 |
| Faseantal | 3 faser |
| Forbindelsestype | 1 RJ45 1 open style |
| Forsyningsspændingsgrænser | 323...528 V |
| Electromagnetisk kompatibilitet | Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 Conducted radio-frequency immunity test Level 3 conforming to IEC 61000-4-6 1.2/50 µs - 8/20 µs surge immunity test Level 3 conforming to IEC 61000-4-5 Electrical fast transient/bur |
| Forsyning | Internal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protection |
| Forureningsgrad | IEC 61800-5-1 |
| Frekens | 12...16 kHz with derating factor 6...16 kHz Justerbar |
| Fysisk interface | 2-wire RS 485 |
| Hastighedsområde | 1...10 |
| Hyppig beslutning | 0.024/50 Hz for analog indgang 0.1 Hz for display enhed |
| Højde | 297 mm |
| IP kapslingsklasse | IP55 conforming to EN/IEC 60529 IP55 conforming to EN/IEC 61800-5-1 |
| Isolationsmodstand | >= 1 MOhm at 500 V DC for 1 minute |
| Kommunikationsfunktioner | Monitoring inhibitable Read device identification (43) Read holding registers (03) 2 words maximum Time out setting from 0.1 to 100 s Write multiple registers (16) 2 words maximum Write single register (06) |
| Ledningstype | UL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVC IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPR |
| Linearitetsfejl | +/- 0.2 % for udgang (FM) +/- 0.15 % of maximum value for indgang (VIB) +/- 0.15 % of maximum value for indgang (VIA) |
| Lokal indikering | 1 LED - rød - DC bus energized |
| Maximum sluttestrøm | 2 A at 30 V DC on inductiv load - cos phi = 0.4 - L/R = 7 ms (FL, R) 2 A at 250 V AC on inductiv load - cos phi = 0.4 - L/R = 7 ms (FL, R) 5 A at 30 V DC on modstandsdygtig load - cos phi = 1 - L/R = 0 ms (FL, R) 5 A at 250 V AC on modstandsdygtig load - |
| Maximum transient current | 2.4 A for 60 s |
| Miljøbestemte kendetegn | Classes 3S2 conforming to IEC 60721-3-3 Classes 3C1 conforming to IEC 60721-3-3 |
| Minimum sluttestrøm | 3 mA at 24 V DC (configurable relay logic) |
| Motor slip compensation | Justerbar Automatic whatever the load Not available in voltage/frequency ratio motor control |
| Motoreffekt i hp | 1 hp |
| Motoreffekt i kW | 0.75 kW |
| Mærkning | CE |
| Netfrekvens | 47.5...63 Hz |
| Nominal switching frequency | 12 kHz |
| Option card | Kommunikation kort for LonWorks |
| Polaritetstype | No impedance |
| Product specific application | Pumps and fans in HVAC |
| Productcertificeringer | CSA C-Tick NOM 117 UL |
| Produkttype | Frekvensomformer |
| Prospektiv kortslutningsstrøm Isc | 5 kA |
| Protokol for kommunikationsport | APOGEE FLN BACnet LonWorks METASYS N2 Modbus |
| Prøvevarighed | 22 ms +/- 0.5 ms (VIB) - analog input(s) 3.5 ms +/- 0.5 ms (VIA) - analog input(s) 2 ms +/- 0.5 ms (RES) - separat input(s) 2 ms +/- 0.5 ms (R) - separat input(s) 2 ms +/- 0.5 ms (F) - separat input(s) |
| Range of product | Altivar 212 |
| Regulation loop | Adjustable PI regulator |
| Relativ fugtighed | 5...95 % without dripping water conforming to IEC 60068-2-3 5...95 % without condensation conforming to IEC 60068-2-3 |
| RoHS EUR conformity date(YYWW) | 1112 |
| RoHS EUR status | Compliant |
| Sammenbygningens type | With heat sink |
| Shockmodstand | 15 gn for 11 ms conforming to IEC 60068-2-27 |
| Reaktionstid | 7 ms +/- 0.5 ms (RY, RC) - separat output(s) 7 ms +/- 0.5 ms (FLB, FLC) - separat output(s) 7 ms +/- 0.5 ms (FLA, FLC) - separat output(s) 2 ms +/- 0.5 ms (FM) - analog output(s) |
| Speed accuracy | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation |
| Speed drive output frequency | 0.5...200 Hz |
| Standarder | EN 55011 class A group 1 EN 61800-3 EN 61800-3 category C2 EN 61800-3 category C3 EN 61800-3 environments 1 category C1 EN 61800-3 environments 1 category C2 EN 61800-3 environments 1 category C3 EN 61800-3 environments 2 category C1 EN 61800-3 environmen |
| Støjgrænse | 48 dB conforming to 86/188/EEC |
| Tilgangsstrøm | 1.7 A for 380 V 1.4 A for 480 V |
| Tilslutningsfrekvens | 50...60 Hz (- 5...5 %) |
| Tilspændingsmoment | 1.3 N.m - 11.5 lb.in (L1/R, L2/S, L3/T) 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) |
| Tilsyneladende effekt | 1.6 kVA for 380 V |
| Torque accuracy | +/- 15 % |
| Transient overmoment | 120 % of nominal motor torque, +/- 10 % for 60 s |
| Transmissionsstel | RTU |
| Transmissionsstørrelse | 9600 bps or 19200 bps |
| Udgangsspænding | <= power supply voltage |
| Vedvarende udgangsstrøm | 2.2 A at 380/460 V |
| Vibrationsmodstand | 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6 |
| Vægt | 7 kg |
