Navigér
Sœg

Frekvensomformer ATV212 75 kW 3x380 - 480 V IP55 C1-EMC


Varenr:ATV212WD75N4C
El nr:7565709425
EAN13 nr:3606480322808
Pakning:1stk

[Us] rated supply voltage380...480 V (- 15...10 %)
Accellerations- og nedreguleringsrampeAutomatic based on the load Linear adjustable separately from 0.01 to 3200 s
Accuracy+/- 1 % (FM) for a temperature variation 60 °C +/- 0.6 % (VIB) for a temperature variation 60 °C +/- 0.6 % (VIA) for a temperature variation 60 °C
AdskillelseElectrical between power and control
Ambient air temperature for operation> 40...50 °C with derating factor -10...40 °C uden derating
Ambient air temperature for storage-25...70 °C
Analog indgangstypeConfigurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bits Kontakt-konfigureret strøm: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bits Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bits Co
Analog udgangstypeKontakt-konfigureret strøm: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bits
Analoge Indgange2
Analoge udgange1
Antal adresser1...247
Antal digitale udgange2
Anvendes tilAsynchronous motors
Asynkron motorkontrolVoltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
BeskyttelsestypeWith PTC probes for Motor Motor fase brud for Motor Thermal protection for Motor Imod løs fase for køre Line supply undervoltage for køre Line supply overvoltage and undervoltage for køre Imod overskridende maks. Hastighed for køre Break on the control ci
Bredde362 mm
Bremsning ved stilstandMed DC indsprøjtning
Dataformat8 bits, 1 stop, odd even or no configurable parity
Dielektrisk gennemslagsholdbarhed5092 V DC between control and power terminals 3535 V DC between earth and power terminals
Digital indgangslogikNegative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1) Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)
Digital indgangstypeProgrammering (RES) 24 V DC, with level 1 PLC - 4700 Ohm Programmering (R) 24 V DC, with level 1 PLC - 4700 Ohm Programmering (F) 24 V DC, with level 1 PLC - 4700 Ohm
Digital udgangstypeConfigurable relay logic: (RY, RC) No - 100000 cycles Configurable relay logic: (FLB, FLC) NC - 100000 cycles Configurable relay logic: (FLA, FLC) No - 100000 cycles
Driftshøjde1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m <= 1000 m without derating
DriftsstillingVertical +/- 10 degree
Dybde364 mm
Electromagnetisk kompatibilitetVoltage dips and interruptions immunity test conforming to IEC 61000-4-11 Conducted radio-frequency immunity test Level 3 conforming to IEC 61000-4-6 1.2/50 µs - 8/20 µs surge immunity test Level 3 conforming to IEC 61000-4-5 Electrical fast transient/bur
Elektrisk tilslutningTerminal 150 mm2 kcmil size: 300 (U/T1, V/T2, W/T3) Terminal 130 mm² kcmil size: 250 (L1/R, L2/S, L3/T) Terminal 2.5 mm² / AWG 14 (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
EMC filterClass C1 EMC filter integrated
Enhedens korte navnATV212
Faseantal3 faser
Forbindelsestype1 RJ45 1 open style
Forsyningsspændingsgrænser323...528 V
ForureningsgradIEC 61800-5-1
Frekens8...16 kHz with derating factor 6...16 kHz Justerbar
Fysisk interface2-wire RS 485
ForsyningInternal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protection
Hastighedsområde1...10
Hyppig beslutning0.024/50 Hz for analog indgang 0.1 Hz for display enhed
Højde1000 mm
IP kapslingsklasseIP55 conforming to EN/IEC 60529 IP55 conforming to EN/IEC 61800-5-1
Isolationsmodstand>= 1 MOhm at 500 V DC for 1 minute
KommunikationsfunktionerMonitoring inhibitable Read device identification (43) Read holding registers (03) 2 words maximum Time out setting from 0.1 to 100 s Write multiple registers (16) 2 words maximum Write single register (06)
LedningstypeUL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVC IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPR
Linearitetsfejl+/- 0.2 % for udgang (FM) +/- 0.15 % of maximum value for indgang (VIB) +/- 0.15 % of maximum value for indgang (VIA)
Lokal indikering1 LED - rød - DC bus energized
Maximum sluttestrøm2 A at 30 V DC on inductiv load - cos phi = 0.4 - L/R = 7 ms (FL, R) 2 A at 250 V AC on inductiv load - cos phi = 0.4 - L/R = 7 ms (FL, R) 5 A at 30 V DC on modstandsdygtig load - cos phi = 1 - L/R = 0 ms (FL, R) 5 A at 250 V AC on modstandsdygtig load -
Maximum transient current176 A for 60 s
Miljøbestemte kendetegnClasses 3S2 conforming to IEC 60721-3-3 Classes 3C1 conforming to IEC 60721-3-3
Minimum sluttestrøm3 mA at 24 V DC (configurable relay logic)
Motor slip compensationJusterbar Automatic whatever the load Not available in voltage/frequency ratio motor control
Motoreffekt i hp100 hp
Motoreffekt i kW75 KW
MærkningCE
Netfrekvens47.5...63 Hz
Nominal switching frequency8 kHz
Option cardKommunikation kort for LonWorks
PolaritetstypeNo impedance
Product specific applicationPumps and fans in HVAC
ProductcertificeringerCSA C-Tick NOM 117 UL
ProdukttypeFrekvensomformer
Prospektiv kortslutningsstrøm Isc22 kA
Protokol for kommunikationsportAPOGEE FLN BACnet LonWorks METASYS N2 Modbus
Prøvevarighed22 ms +/- 0.5 ms (VIB) - analog input(s) 3.5 ms +/- 0.5 ms (VIA) - analog input(s) 2 ms +/- 0.5 ms (RES) - separat input(s) 2 ms +/- 0.5 ms (R) - separat input(s) 2 ms +/- 0.5 ms (F) - separat input(s)
Range of productAltivar 212
Reaktionstid7 ms +/- 0.5 ms (RY, RC) - separat output(s) 7 ms +/- 0.5 ms (FLB, FLC) - separat output(s) 7 ms +/- 0.5 ms (FLA, FLC) - separat output(s) 2 ms +/- 0.5 ms (FM) - analog output(s)
Regulation loopAdjustable PI regulator
Relativ fugtighed5...95 % without dripping water conforming to IEC 60068-2-3 5...95 % without condensation conforming to IEC 60068-2-3
RoHS EUR conformity date(YYWW)1112
RoHS EUR statusCompliant
Sammenbygningens typeWith heat sink
Shockmodstand15 gn for 11 ms conforming to IEC 60068-2-27
Speed accuracy+/- 10 % of nominal slip for 0.2 Tn to Tn torque variation
Speed drive output frequency0.5...200 Hz
Støjgrænse63.7 dB conforming to 86/188/EEC
StandarderEN 55011 group 1 klasse B EN 61800-3 EN 61800-3 category C1 EN 61800-3 environments 1 category C1 EN 61800-3 environments 1 category C2 EN 61800-3 environments 1 category C3 EN 61800-3 environments 2 category C1 EN 61800-3 environments 2 category C2 EN 61
Tilgangsstrøm111.3 A for 480 V 141.8 A for 380 V
Tilslutningsfrekvens50...60 Hz (- 5...5 %)
Tilspændingsmoment41 N.m - 360 lb.in (U/T1, V/T2, W/T3) 16 N.m - 142 lb.in (L1/R, L2/S, L3/T) 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
Tilsyneladende effekt105.3 kVA for 380 V
Torque accuracy+/- 15 %
Transient overmoment120 % of nominal motor torque, +/- 10 % for 60 s
TransmissionsstelRTU
Transmissionsstørrelse9600 bps or 19200 bps
Udgangsspænding<= power supply voltage
Vedvarende udgangsstrøm160 A at 380/460 V
Vibrationsmodstand1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6

Yderliger oplysninger: Se venligst SE katalog









©Schneider Electric A/S 2025

Katalog

Hjem Info