 |
| [Us] rated supply voltage | 380...500 V - 15...10 % |
| Accellerations- og nedreguleringsrampe | Linear adjustable separately from 0.1 to 999.9 s S, U or customized |
| Ambient air temperature for storage | -25...70 °C |
| Analog indgangstype | Configurable voltage AI2 +/- 10 V 30 V max 30000 Ohm Configurable voltage AI1 0...10 V 30 V max 30000 Ohm Configurable current AI3 0...20 mA 250 Ohm |
| Analog udgangstype | Configurable voltage AOV 0...10 V 470 Ohm 8 bits Configurable current AOC 0...20 mA 800 Ohm 8 bits |
| Ambient air temperature for operation | -10...60 °C with derating factor without protective cover on top of the drive -10...50 °C without derating with protective cover on top of the drive |
| Analoge Indgange | 3 |
| Analoge udgange | 2 |
| Antal adresser | 1...247 Modbus 1...127 CANopen via VW3 CANTAP2 adaptor |
| Antal digitale udgange | 2 |
| Antal drev | 31 Modbus 127 CANopen via VW3 CANTAP2 adaptor |
| Anvendes til | Asynchronous motors |
| Asynkron motorkontrol | Factory set : constant torque Sensorless flux vector control with PWM type motor control signal |
| Beskyttelsesbehandling | TC |
| Beskyttelsestype | Thermal protection Motor Short-circuit between motor phases køre Over varme beskyttelse køre Overcurrent between output phases and earth (on power up only) køre Motor phase breaks køre Line supply phase loss safety function, for three phases supply køre L |
| Bremsemoment | 30 % without braking resistor 100 % with braking resistor continuously <= 150 % with braking resistor 60 s |
| Bremsning ved stilstand | Med DC indsprøjtning |
| Dielektrisk gennemslagsholdbarhed | 3400 V AC between control and power terminals 2410 V DC between earth and power terminals |
| Digital indgangslogik | Positive logic (source) LI1...LI6 < 5 V > 11 V Negative logic (source) LI1...LI6 > 19 V Logic input not wired LI1...LI4 < 13 V |
| Digital indgangsnummer | 6 |
| Digital indgangstype | Programmering LI1...LI6 24 V 0...100 mA PLC 3500 Ohm |
| Digital udgangstype | Configurable relay logic R2A, R2B NC 100000 kredsløb Configurable relay logic R1A, R1B, R1C 1 NO + 1 NC 100000 kredsløb |
| Driftshøjde | >= 1000 m with current derating 1 % per 100 m <= 1000 m without derating |
| Driftsstilling | Vertical +/- 10 degree |
| EAN-nummer | 3389110587869 |
| Effekttab i W | 150 W at nominal load |
| Electromagnetisk kompatibilitet | Radiated radio-frequency electromagnetic field immunity test Level 3 IEC 61000-4-3 Electrostatic discharge immunity test Level 3 IEC 61000-4-2 Electrical fast transient/burst immunity test level 4 IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test Leve |
| Elektrisk tilslutning | Terminal 2.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- Terminal 2.5 mm² AWG 14 Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 |
| EMC filter | Integrated |
| Faseantal | 3 faser |
| Forsyning | Internal supply for reference potentiometer 10...10.8 V > 0...0.01 A short-circuit protection Internal supply for reference potentiometer 10...10.8 V > 0...0.01 A overbelastningsbeskyttelse Internal supply for logic inputs 19...30 V > 0...0.1 A short-circ |
| Forsyningsspændingsgrænser | 323...550 V |
| Forureningsgrad | 2 |
| Frekens | 2...16 kHz Justerbar |
| Fysisk interface | RS485 multidrop serial link Modbus |
| Hastighedsområde | 1...50 |
| Hyppig beslutning | 0.1...100 Hz analog indgang 0.1 Hz display enhed |
| IP kapslingsklasse | IP55 |
| Isolation | Electrical between power and control |
| Isolationsmodstand | >= 500 mOhm 500 V DC for 1 minute |
| Klemmetype | 1 RJ45 Modbus 1 RJ45 CANopen via VW3 CANTAP2 adaptor |
| Kommerciel status | Commercialised |
| Lagerkode | På lager |
| Linearitetsfejl | +/- 0.2 % udgang |
| Lokal indikering | Four 7-segment display units CANopen bus status 1 LED rød drive voltage |
| Maximum transient current | 14.3 A 60 s |
| Minimum sluttestrøm | 10 mA 5 V DC R1-R2 |
| Maximum sluttestrøm | 5 A 30 V DC modstandsdygtig cos phi = 1 L/R = 0 ms R1-R2 5 A 250 V AC modstandsdygtig cos phi = 1 L/R = 0 ms R1-R2 2 A 30 V DC inductiv cos phi = 0.4 L/R = 7 ms R1-R2 2 A 250 V AC inductiv cos phi = 0.4 L/R = 7 ms R1-R2 |
| Motor slip compensation | Justerbar Automatic whatever the load Suppressable |
| Motoreffekt i hp | 5 hp |
| Motoreffekt i kW | 4 kW |
| Mærkning | CE |
| Netfrekvensgrænse | 47.5...63 Hz |
| Nominal switching frequency | 4 kHz |
| Nominel udgangsstrøm | 9.5 A 4 kHz |
| Productcertificeringer | CSA C-Tick N998 UL |
| Produktsortiment | Altivar 31 |
| Produktspecifik applikation | Simple machine |
| Produkttype | Frekvensomformer |
| Prospektiv kortslutningsstrøm Isc | 5 kA |
| Protokol for kommunikationsport | CANopen Modbus |
| Prøvevarighed | 8 ms AI1, AI2, AI3 analog 4 ms LI1...LI6 separat |
| Reaktionstid | 8 ms separat R1A, R1B, R1C, R2A, R2B 8 ms analog AOV, AOC |
| Regulation loop | Frequency PI regulator |
| Relativ fugtighed | 5...95 % without dripping water IEC 60068-2-3 5...95 % without condensation IEC 60068-2-3 |
| Sammenbygningens type | Enclosed |
| Shockmodstand | 15 gn 11 ms EN/IEC 60068-2-27 |
| Speed drive output frequency | 0.5...500 Hz |
| Standarder | EN 50178 |
| Tidskonstant | 5 ms for reference change |
| Tilgangsstrøm | 13.9 A 380 V 1 kA 10.6 A 500 V 1 kA |
| Tilslutningsfrekvens | 50...60 Hz - 5...5 % |
| Tilspændingsmoment | 0.8 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 0.6 N.m Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 |
| Tilsyneladende effekt | 9.2 kVA |
| Transient overmoment | 150...170 % of nominal motor torque |
| Transmissionsstel | RTU Modbus |
| Transmissionsstørrelse | 4800, 9600 or 19200 bps Modbus 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen via VW3 CANTAP2 adaptor |
| Type nr. | ATV31 |
| Udgangsspænding | <= power supply voltage |
| Vibrationsmodstand | 1.5 mm 3...13 Hz EN/IEC 60068-2-6 1 gn 13...150 Hz EN/IEC 60068-2-6 |
| Vægt | 10.7 kg |
