 |
| [Us] rated supply voltage | 380...415 V (+/- 10 %) |
| Accellerations- og nedreguleringsrampe | Linear adjustable separately from 0.01 to 9000 s S, U or customized |
| Adskillelse | Between power and control terminals |
| Ambient air temperature for operation | 40...50 °C with current derating of 1.8 % per °C 0...40 °C without derating |
| Ambient air temperature for storage | -25...70 °C |
| Analog indgangstype | Software-configurable current: (AI2) 0...20 mA/4...20 mA - 250 Ohm - sampling time: 1.5...2.5 ms - resolution: 11 bits Software-configurable voltage: (AI2) 0...10 V DC - 24 V max - 30 kOhm - sampling time: 1.5...2.5 ms - resolution: 11 bits Bipolar differ |
| Analog udgangstype | Software-configurable current: (AO1) 0...20 mA/4...20 mA - 500 Ohm - sampling time: 1.5...2.5 ms - resolution: 10 bits Software-configurable voltage: (AO1) 0...10 V DC - 470 Ohm - sampling time: 1.5...2.5 ms - resolution: 10 bits |
| Analoge Indgange | 2 |
| Analoge udgange | 1 |
| Antal adresser | 1...247 for Modbus 1...127 for CANopen |
| Antal digitale udgange | 1 |
| Anvendes til | Asynchronous motors Synchronous motors |
| Asynkron motorkontrol | Energibesparelse størrelse Voltage/frequency ratio (2 or 5 points) Flux vector control without sensor, standard |
| Beskyttelsestype | Motor fase brud for Motor Thermal protection for Motor Short-circuit between motor phases for køre Power removal for køre Overvoltages on the DC bus for køre Over varme beskyttelse for køre Overcurrent between output phases and earth for køre Line supply |
| Bredde | 1600 mm |
| Bremsemoment | 120 % for 60 seconds 100 % continuous |
| Bremsning ved stilstand | By regenerative braking with active front end |
| Colour of enclosure | Light grey RAL 7035 |
| Dataformat | 8 bits, odd even or no configurable parity for Modbus på terminal 8 bits, 1 stop, even parity for Modbus on front face |
| Dielektrisk gennemslagsholdbarhed | 5092 V DC between control and power terminals 3535 V DC between earth and power terminals |
| Digital indgangslogik | Positive logic (source) (PWR) , 0...2 V (state 0), 17...30 V (state 1) Negative logic (sink) (LI1...LI6) , 16...30 V (state 0), 0...10 V (state 1) Positive logic (source) (LI1...LI6) , 0...5 V (state 0), 11...30 V (state 1) |
| Digital indgangsnummer | 6 |
| Digital udgangstype | Configurable relay logic: (R1A, R1B, R1C) NO/NC - 6.5...7.5 ms - 100000 cycles |
| Driftshøjde | 1000...3000 m with current derating 1 % per 100 m <= 1000 m without derating |
| Driftsstilling | Vertical +/- 10 degree |
| Dybde | 642 mm |
| EMC filter | Integrated |
| Enhedens korte navn | ATV61 |
| Faseantal | 3 faser |
| Forsyningsspændingsgrænser | 342...457 V |
| Digital indgangstype | Safety input (PWR) 24 V DC (<= 30 V) - 1.5 kOhm Kontakt-konfiguration (LI6) 24 V DC (<= 30 V) , with level 1 PLC - 1.5 kOhm - sampling time: 1.5...2.5 ms Programmering (LI1...LI4) 24 V DC (<= 30 V) , with level 1 PLC - 3.5 kOhm - sampling time: 1.5...2.5 |
| Elektrisk tilslutning | Terminal M12 - 3 x 185 mm² (L1/R, L2/S, L3/T) entry from the bottom Terminal M12 - 2 x 240 mm² (U/T1, V/T2, W/T3) entry from the bottom Terminal - 2.5 mm2 / AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) entry from the bottom |
| Forsyning | Internal supply at 24 V DC (21...27 V), 0...100 mA Internal supply for reference potentiometer at 10 V DC (10...11 V), 0...10 mA Ekstern forsyning at 24 V DC (19...30 V), 1 A, 30 W |
| Forureningsgrad | 3 conforming to EN/IEC 61800-5-1 |
| Frekens | 2.5...8 kHz with derating factor 2...8 kHz Justerbar |
| Function available | Isolated amplifier for control circuit Adaptor for 115 V logic inputs for control circuit Control terminals for control circuit External 24 V DC supply terminals for effekt kreds Relay output C/O for control circuit Enclosure plinth for effekt kreds Cable |
| Fysisk interface | 2-wire RS 485 for Modbus |
| Hastighedsområde | 1...100 in open-loop mode, without speed feedback |
| Hyppig beslutning | 0.1 Hz for display enhed 0.024/50 Hz for analog indgang |
| Højde | 2237 mm |
| IP kapslingsklasse | IP54 |
| Isolationsmodstand | > 1 mOhm at 500 V DC for 1 minute to earth |
| Kit sæt | A line choke A switch and fast-acting fuses An IP65 remote mounting kit for graphic display terminal Terminals/bars for motor connection ATV61HC31N4D standard drive IP00 A wired ready-assembled Schneider Spacial SF enclosure Active infeed converter Contro |
| Klemmetype | Male SUB-D 9 on RJ45 for CANopen 1 RJ45 for Modbus på terminal 1 RJ45 for Modbus on front face |
| Ledningstype | IEC cable at 40 °C, copper 70 °C / PVC |
| Lokal indikering | LCD display unit - operation function, status and configuration - mounted in the front door |
| Maximum sluttestrøm | 2 A at 30 V DC on inductiv load - L/R = 7 ms (configurable relay logic) 2 A at 250 V AC on inductiv load - cos phi = 0.4 (configurable relay logic) 5 A at 30 V DC on modstandsdygtig load - L/R = 0 ms (configurable relay logic) 5 A at 250 V AC on modstands |
| Maximum transient current | 739 A for 60 s, 3 faser |
| Miljøbestemte kendetegn | 3K3 without condensation conforming to IEC 60721-3-3 |
| Minimum sluttestrøm | 3 mA at 24 V DC (configurable relay logic) |
| Motor recommanded cable cross section | 3 (3 x 150) mm² |
| Motor slip compensation | Justerbar Automatic whatever the load Can be suppressed Not available in voltage/frequency ratio (2 or 5 points) |
| Motoreffekt i kW | 315 KW, 3 faser at 380...415 V |
| Mærkning | CE |
| Netfrekvensgrænse | 47.5...63 Hz |
| Nominal switching frequency | 2.5 kHz |
| Overspændingskategori | Klasse 3 conforming to EN 50178 |
| Polaritetstype | No impedance for Modbus |
| Productcertificeringer | C-Tick GOST |
| Produkttype | Frekvensomformer |
| Prospektiv kortslutningsstrøm Isc | 20 kA without external fuses 100 kA with option circuit breaker 100 kA with external fuses |
| Protokol for kommunikationsport | CANopen Modbus |
| Range of product | Altivar 61 Plus-LH |
| Regulation loop | Adjustable PI regulator |
| Option card | Encoder interface cards Extended I/O extension card Basic I/O extension card Kommunikation kort for Profibus DP V1 Kommunikation kort for Profibus DP Multi-pumpekort Kommunikation kort for Modbus/Uni-Telway Kommunikation kort for Modbus TCP Kommunikation |
| Relativ fugtighed | <= 95 % |
| Sammenbygningens type | In floor-standing enclosure compact version |
| Shockmodstand | 4 gn for 11 ms conforming to EN/IEC 60068-2-27 3M2 conforming to EN/IEC 60721-3-3 |
| Short circuit protection | 700 A 1 fuse (gI fuse) on power supply upstream |
| Speed accuracy | +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation without speed feedback |
| Speed drive output frequency | 0.1...500 Hz |
| Standarder | EN 60204-1 EN 61800-3 environments 2 category C3 EN 61800-5-1 EN 61800-2 |
| Støjgrænse | 78 dB |
| Synkronmotorkontrol | Vector control without sensor, standard |
| Tilgangs metode | Slave for CANopen |
| Tilgangsstrøm | 495 A at 400 V 3 faser / 315 KW |
| Tilslutningsfrekvens | 50...60 Hz (- 5...5 %) |
| Tilsyneladende effekt | 343 kVA at 400 V, 3 faser 315 KW |
| Torque accuracy | +/- 15 % in open-loop mode, without speed feedback |
| Transient overmoment | 120 % of nominal motor torque for 60 s |
| Transmissionsstel | RTU for Modbus |
| Transmissionsstørrelse | 9600 bps, 19200 bps for Modbus on front face 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus på terminal 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen |
| Udgangsspænding | <= power supply voltage |
| Vedvarende udgangsstrøm | 616 A, 2.5 kHz at 400 V 3 faser |
| Vibrationsmodstand | 3M3 conforming to EN/IEC 60721-3-3 1.5 mm peak to peak (f = 3...10 Hz) conforming to EN/IEC 60068-2-6 0.6 gn (f = 10...200 Hz) conforming to EN/IEC 60068-2-6 |
| Volume of cooling air | 2400 m3/h |
| Vægt | 995 kg |
