Servo-integreret motor 70 mm IP65 640W 230 V Br,
| Varenr: | BMI0702T31F |
| El nr: | 7565816554 |
| EAN13 nr: | 3606485376219 |
| Pakning: | 1stk |
 |
| [Us] rated supply voltage | 115...230 V (- 15...10 %) |
| Back emf constant | 42.1 V/krpm at 20 °C |
| Brake pull-in power | 5 W |
| Centring collar depth | 2.5 mm |
| Centring collar diameter | 60 mm |
| Circle diameter of the mounting holes | 75...82 mm |
| Continuous output current | 2.6 A at 8 kHz |
| Continuous stall current | 2.6 A |
| Continuous stall torque | 2.48 N.m at 115...230 V, single phase |
| Device short name | BMI |
| Distance shaft shoulder-flange | 2.5 mm |
| Electrical connection | Printed circuit board connector |
| EMC filter | Integrated |
| Feedback type | Absolute single turn SinCos Hiperface |
| Holding brake | With |
| Holding torque | 3 N.m for holding brake |
| IP degree of protection | IP65 |
| Key width | 4 mm |
| Length | 306 mm |
| Maximum axial force Fa | 0.2 x Fr |
| Maximum current Irms | 17.7 A at 115 V, single phase 17.7 A at 230 V, single phase |
| Maximum mechanical speed | 8000 rpm |
| Maximum radial force Fr | 390 N at 6000 rpm 410 N at 5000 rpm 450 N at 4000 rpm 490 N at 3000 rpm 560 N at 2000 rpm 710 N at 1000 rpm |
| Motor flange size | 70 mm |
| Mounting holes diameter | 5.5 mm |
| Mounting support | International standard flange |
| Network frequency limits | 47.5...63 Hz |
| Network number of phases | Single phase |
| Nominal output power | 400 W at 115 V, single phase 700 W at 230 V, single phase |
| Nominal speed | 1700 rpm at 115 V, single phase 4000 rpm at 230 V, single phase |
| Nominal torque | 1.7 N.m at 230 V, single phase 2.2 N.m at 115 V, single phase |
| Number of motor poles | 10 |
| Number of motor stacks | 2 |
| Number of mounting holes | 4 |
| Output current 3s peak | 10.5 A at 230 V for 1 s |
| Peak stall torque | 6.6 N.m at 230 V, single phase 6.6 N.m at 115 V, single phase |
| Product compatibility | LXM32i drive control unit (EtherCAT) LXM32i drive control unit (CANopen) |
| Product or component type | Servo motor with power stage |
| Range compatibility | Lexium 32i |
| Rotor inertia | 1.24 kg.cm² |
| Second shaft | Without second shaft end |
| Shaft diameter | 11 mm |
| Shaft end | Keyed |
| Shaft length | 23 mm |
| Speed feedback resolution | 131072 points/turn |
| Stator electrical time constant | 2.89 ms at 20 °C |
| Stator inductance | 7.8 mH at 20 °C |
| Stator resistance | 2.7 Ohm at 20 °C |
| Supply frequency | 50/60 Hz (- 5...5 %) |
| Supply voltage limits | 100...240 V |
| Torque constant | 0.63 N.m/A at 20 °C |
| Type of cooling | Natural convection |
Yderliger oplysninger:
Se venligst SE katalog©Schneider Electric A/S 2025
