 |
[In] rated current | 10 A at 250 V AC conforming to EN 60730-1 |
[Ui] rated insulation voltage | 500 V conforming to EN/IEC 60947-1 |
[Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-1 |
Adjustable range of switching point on falling pressure | 0.3...3.1 bar |
Adjustable range of switching point on rising pressure | 1.4...4.6 bar |
Ambient air temperature for operation | 0...45 °C |
Ambient air temperature for storage | -30...80 °C |
Cable entry | 2 entries incorporating Pg 13.5 plastic cable gland, cable outer diameter: 9...13 mm conforming to NF C 68-300 |
Class of protection against electric shock | Class I conforming to IEC 536 |
Contacts type and composition | 2 NC snap action |
Controlled fluid | Sea water (0...70 °C) Fresh water (0...70 °C) |
Depth | 106 mm |
Destruction pressure | 20 bar |
Electrical circuit type | Power circuit |
Electrical connection | Screw-clamp terminals, clamping capacity: 1 x 1...2 x 2 mm˛ |
Electrical durability | 40000 cycles at 10 cyc/mn |
Enclosure material | PS |
Fluid connection type | R 1/4 (male) conforming to ISO 7 |
Height | 123 mm |
IP degree of protection | IP65 conforming to EN/IEC 60529 |
Local display | Without |
Materials in contact with fluid | Nitrile Nylon 6/6 Zinc plated steel |
Maximum permissible accidental pressure | 8 bar |
Maximum permissible pressure - per cycle | 5.75 bar |
Mechanical durability | 400000 cycles |
Motor power kW | 1.5 kW 2 hp AC 400 V 3 phases 1.5 kW 2 hp AC 400 V 1 phase 1.5 kW 2 hp AC 230 V 3 phases 1.1 kW 1.5 hp AC 230 V 1 phase 1.1 kW 1.5 hp AC 110 V 3 phases 0.75 kW 1 hp AC 110 V 1 phase |
Natural differential at high setting | 1.5 bar |
Natural differential at low setting | 1.1 bar |
Natural differential at middle setting | 1.3 bar |
Operating position | Any position |
Operating rate | 10 cyc/mn |
Pressure actuator | Diaphragm |
Pressure sensor name | FTG |
Pressure sensor size | 4.6 bar |
Pressure sensor type | Electromechanical pressure sensor |
Pressure switch type of operation | Detection of single threshold |
Product specific application | - |
Product weight | 0.34 kg |
Protective treatment | TC |
Range of product | OsiSense XM |
Repeat accuracy | < 2 % |
Scale type | Fixed differential |
Setting | Internal |
Short circuit protection | 20 A cartridge fuse type gG |
Standards | CE EN/IEC 60730 |
Terminal block type | 4 terminals |
Terminals description ISO n°1 | (1-2)NC (3-4)NC |
Width | 72 mm |