 |
| [In] rated current | 10 A at 250 V AC conforming to EN 60730-1 |
| [Ui] rated insulation voltage | 500 V conforming to EN/IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-1 |
| Adjustable range of switching point on falling pressure | 0.5...5.4 bar |
| Adjustable range of switching point on rising pressure | 2.8...7 bar |
| Ambient air temperature for operation | 0...45 °C |
| Ambient air temperature for storage | -30...80 °C |
| Cable entry | 2 entries incorporating Pg 13.5 plastic cable gland, cable outer diameter: 9...13 mm conforming to NF C 68-300 |
| Class of protection against electric shock | Class I conforming to IEC 536 |
| Contacts type and composition | 2 NC snap action |
| Controlled fluid | Sea water (0...70 °C) Fresh water (0...70 °C) |
| Depth | 106 mm |
| Destruction pressure | 20 bar |
| Electrical circuit type | Power circuit |
| Electrical connection | Screw-clamp terminals, clamping capacity: 1 x 1...2 x 2 mm² |
| Electrical durability | 100000 cycles at 10 cyc/mn |
| Enclosure material | PS |
| Fluid connection type | G 1/4 (female) conforming to ISO 228 |
| Height | 115 mm |
| IP degree of protection | IP65 conforming to EN/IEC 60529 |
| Local display | Without |
| Materials in contact with fluid | Nitrile Nylon 6/6 Zinc plated steel |
| Maximum permissible accidental pressure | 15 bar |
| Maximum permissible pressure - per cycle | 8.75 bar |
| Mechanical durability | 1000000 cycles |
| Motor power kW | 2.2 kW 3 hp AC 400 V 3 phases 2.2 kW 3 hp AC 230 V 3 phases 1.5 kW 2 hp AC 400 V 1 phase 1.5 kW 2 hp AC 230 V 1 phase 1.1 kW 1.5 hp AC 110 V 3 phases 0.75 kW 1 hp AC 110 V 1 phase |
| Operating position | Any position |
| Operating rate | 10 cyc/mn |
| Possible differential maximum at high setting | 2.7 bar |
| Possible differential maximum at low setting | 2.3 bar |
| Possible differential maximum at middle setting | 2.5 bar |
| Possible differential minimum at high setting | 1.6 bar |
| Possible differential minimum at low setting | 1.2 bar |
| Possible differential minimum at middle setting | 1.4 bar |
| Pressure actuator | Diaphragm |
| Pressure sensor name | FYG |
| Pressure sensor size | 7 bar |
| Pressure sensor type | Electromechanical pressure sensor |
| Pressure switch type of operation | Regulation between 2 thresholds |
| Product end of life instructions | Available Download End of life manual |
| Product environmental profile | Available Download Product environmental |
| Product specific application | - |
| Product weight | 0.34 kg |
| Protective treatment | TC |
| Range of product | OsiSense XM |
| REACh | Reference contains SVHC above the threshold - Go to CaP for more details |
| Repeat accuracy | < 2 % |
| RoHS (date code: YYWW) | Compliant - since 0627 - Schneider Electric declaration of conformity |
| Scale type | Adjustable differential |
| Setting | Internal |
| Short circuit protection | 20 A cartridge fuse type gG |
| Standards | CE EN/IEC 60730 |
| Sustainable offer status | Green Premium product |
| Terminal block type | 4 terminals |
| Terminals description ISO n°1 | (1-2)NC (3-4)NC |
| Width | 72 mm |
