 |
| [Icw] rated short-time withstand current | 84 A <= 40 °C 1 min effekt kreds 40 A <= 40 °C 10 min effekt kreds 240 A <= 40 °C 1 s effekt kreds 145 A <= 40 °C 10 s effekt kreds 140 A 100 ms signalling circuit 120 A 500 ms signalling circuit 100 A 1 s signalling circuit |
| [Ie] rated operational current | 32 A (<= 60 °C) at <= 440 V AC AC-1 for effekt kreds |
| [Ith] conventional free air thermal current | 32 A at <= 60 °C for effekt kreds 10 A at <= 60 °C for signalling circuit |
| [Ue] rated operational voltage | <= 690 V DC effekt kreds <= 690 V AC 25...400 Hz for effekt kreds |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947 |
| Ambient air temperature for operation | -5...60 °C |
| Ambient air temperature for storage | -60...80 °C |
| Arbejdsforhold | 3600 cyc/h at <= 60 °C |
| Auxiliary contact composition | 1 NO + 1 NC |
| Beskyttelsesbehandling | TH conforming to IEC 60068-2-30 |
| Beskyttelsesdæksel | Med |
| Brandmodstand | 850 °C conforming to IEC 60695-2-1 |
| [Ui] rated insulation voltage | 600 V for signalling circuit certifications UL 600 V for signalling circuit certifications CSA 690 V for signalling circuit conforming to IEC 60947-1 600 V for effekt kreds certifications UL 600 V for effekt kreds certifications CSA 690 V for effekt kreds |
| Bredde | 45 mm |
| Coil technology | Built-in bidirectional peak limiting diode suppressor |
| Control circuit type | DC standard |
| Driftshøjde | 3000 m uden derating in temperature |
| Driftstid | 16...24 ms åben 53.55...72.45 ms closing |
| Dybde | 107 mm |
| Effekttab i pr. pol | 2.5 W AC-1 |
| Elektrisk holdbarhed | 1 Mcycles 32 A AC-1 at Ue <= 440 V |
| Enhedens korte navn | LC1D |
| Flammemodstand | V1 conforming to UL 94 |
| Forureningsgrad | 3 |
| Hjælpekontakttype | Type intern kontakt (1 NC) conforming to IEC 60947-4-1 Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 |
| Hold-in power consumption in W | 5.4 W at 20 °C |
| Højde | 91 mm |
| Impedans | 2.5 mOhm at 50 Hz - Ith 32 A for effekt kreds |
| Indkoblingseffekt i W | 5.4 W at 20 °C |
| Ingen overlappende tid | 1.5 ms på energien (between NC and NO contact) 1.5 ms på de-energinisering (between NC and NO contact) |
| IP kapslingsklasse | IP2x fronten IEC 60529 |
| Isolationsmodstand | > 10 MOhm for signalling circuit |
| Mechanical robustness | Shocks contactor closed 15 Gn for 11 ms Shocks contactor open 10 Gn for 11 ms Vibrations contactor closed 4 Gn, 5...300 Hz Vibrations contactor open 2 Gn, 5...300 Hz |
| Mekanisk holdbarhed | 30 Mcycles |
| Minimum sluttestrøm | 5 mA for signalling circuit |
| Minimum spænding | 17 V for signalling circuit |
| Montagevejledning | Plade Skinne |
| Mærkebrydeevne | 300 A at 440 V for effekt kreds conforming to IEC 60947 |
| Mærkeslutteevne Irms | 300 A at 440 V for effekt kreds conforming to IEC 60947 250 A DC for signalling circuit conforming to IEC 60947-5-1 140 A AC for signalling circuit conforming to IEC 60947-5-1 |
| Overspændingskategori | III |
| Polbeskrivelse | 4P |
| Pole contact composition | 2 NO + 2 NC |
| Productcertificeringer | BV CCC CSA DNV GL GOST RINA UL LROS |
| Produkttype | Kontaktor |
| Range of product | TeSys d |
| Safety reliability level | B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 |
| Signalling circuit frequency | 25...400 Hz |
| Standarder | EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 n°14 |
| Styrekredsens spændingsgrænser | 0.7...1.25 Uc at 60 °C operational 0.1...0.25 Uc at 60 °C drop-out |
| Styrespænding | 24 V DC |
| Tidskonstant | 28 ms |
| Til kobling af | Resistive load |
| Tilhørende sikringsstørrelse | 35 A gG at <= 690 V coordination type 2 for effekt kreds 50 A gG at <= 690 V coordination type 1 for effekt kreds 10 A gG for signalling circuit conforming to IEC 60947-5-1 |
| Tilladelig omgivelsestemperatur omkring enheden | -40...70 °C at Uc |
| Utilisation category | AC-1 |
| Vægt | 0.585 kg |
| Tilslutningsklemmer | Power circuit: connector 2 cable(s) 2.5...16 mm² - cable stiffness: solid - without cable end Power circuit: connector 1 cable(s) 2.5...16 mm² - cable stiffness: solid - without cable end Power circuit: connector 2 cable(s) 2.5...10 mm² - cable stiffness: |
| Tilspændingsmoment | Effekt kreds: 1.7 N.m - on connector - with screwdriver Philips No 2 Effekt kreds: 1.7 N.m - on connector - with screwdriver flat Ø 6 mm Control circuit: 1.7 N.m - on skrue klemmeterminaler - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on skr |
