 |
| [Us] rated supply voltage | 200...230 V (- 15...10 %) 100...120 V (- 15...10 %) |
| Afkølingsmåde | Natural convection |
| Ambient air temperature for operation | 0...50 °C 0...40 °C conforming to UL |
| Ambient air temperature for storage | -25...70 °C |
| Bredde | 72 mm |
| Communication interface | Integrated puls/retning |
| Driftshøjde | > 1000...< 2000 m without derating (maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm) <= 1000 m without derating |
| Dybde | 140 mm |
| Enhedens korte navn | SD326 |
| Faseantal | Enkel faset |
| Format of the drive | Block |
| Forsyningsspændingsgrænser | 100...120 V 200...240 V |
| Forureningsgrad | Level 2 |
| Function available | Holding brake monitoring Roterende overvågning |
| Fysisk interface | RS422 - ENC_A/ENC_B signal input |
| Højde | 145 mm |
| Electromagnetisk kompatibilitet | Voltage/current impulse Level 3 conforming to EN/IEC 61000-4-5 Immunity to radiated radio-electrical interference Level 3 conforming to EN/IEC 61000-4-3 Immunity to electrical transients level 4 conforming to EN/IEC 61000-4-4 Electrostatic discharge Level |
| Indgangsfrekvens | <= 400 kHz, ENC_A/ENC_B signal input <= 200 kHz, 5 V optocoupler input signals <= 200 kHz, 24 V optocoupler input signals |
| Indgangsspænding | 24 V -15 %/+20 % (24 V control voltage) |
| Indkoblingsstrøm | < 60 A |
| IP kapslingsklasse | 22-26 on upper part without removal of protective film 18-22 |
| Lækstrøm | < 30 mA conforming to IEC 60990-3 |
| Masimal spænding | 30 V DC (readiness signal output) |
| Maximum motor speed | 3000 rpm |
| Maximum sluttestrøm | 1.7 mA (24 V output signals)+BRAKE_OUT 50 mA (24 V output signals)RM-FAULT_OUT 200 mA (readiness signal output) |
| Motor phase current | <= 2.5 A |
| Mærkning | CE |
| Netfrekvensgrænse | 50...60 Hz (- 15...10 %) |
| Nominel effekt | 270 W at 230 V 180 W at 115 V |
| Overspændingskategori | III |
| Productcertificeringer | CUL UL |
| Produkttype | Motion stepper drive |
| Range of product | Lexium SD3 |
| Relativ fugtighed | 5...85 % without condensation |
| Resterende rippel | <= 5 % (24 V control voltage) |
| RoHS EUR conformity date(YYWW) | 1014 |
| RoHS EUR status | Compliant |
| Shockmodstand | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Short-circuit current | 0.5 kA |
| Spændingsfald | 1 V, 50 mA load (readiness signal output) 1 V, 50 mA load (ENC+5V_OUT signal output) 1 V, 50 mA load (24 V output signals) |
| Spændingstilstand 0 garanteret | <= 0.5 V (5 V optocoupler input signals) <= 5 V (24 V optocoupler input signals) |
| Spændingstilstand 1 garanteret | 2.5...5.25 V (5 V optocoupler input signals) 15...30 V (24 V optocoupler input signals) |
| Standarder | EN/IEC 50178 EN/IEC 61800-3 EN/IEC 61800-3 environment 1 EN/IEC 61800-3 environment 2 EN/IEC 61800-5-1 |
| Strømforbrug | <= 0.2 mA (24 V control voltage) |
| Strømforbrug | <= 7 mA (24 V optocoupler input signals) <= 25 mA (5 V optocoupler input signals) |
| Supply voltage type | AC/DC |
| Tilhørende sikringsstørrelse | 6 A 230 V 6 A 115 V |
| Udgangsspænding | 4.75...5.25 V (ENC+5V_OUT signal output) <= 30 V (24 V output signals) |
| Vibrationsmodstand | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6 1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 |
| Vægt | 1.1 kg |
