 |
| [Us] rated supply voltage | 24 V DC |
| Absolute accuracy error | +/- 1 % of full scale for analog input |
| Ambient air temperature for operation | -10...35 °C for vertical installation -10...55 °C for horizontal installation |
| Ambient air temperature for storage | -25...70 °C |
| Analogue input number | 2 at input range: 0...10 V |
| Analogue input resolution | 10 bits |
| Application structure | 1 configurable freewheeling/cyclic master task 1 cyclic auxiliary task 8 interrupt tasks |
| Backup time | 1 year at 25 °C by interruption of power supply |
| Battery type | BR2032 lithium non-rechargeable, battery life: 4 yr |
| Cable length | <= 3 m shielded cable for fast output <= 30 m unshielded cable for output <= 10 m shielded cable for fast input <= 30 m unshielded cable for input |
| Clock drift | <= 30 s/month at 25 °C |
| Communication port protocol | Non isolated serial link : Modbus protocol master/slave - RTU/ASCII or SoMachine-Network USB port : USB protocol - SoMachine-Network |
| Communication service | DHCP client Modbus TCP server Modbus TCP client Modbus TCP slave device |
| Configurable filtering time | 12 ms for input 3 ms for input 0 ms for input |
| Control signal type | Single phase signal at 100 kHz for fast input (HSC mode) Pulse/direction signal at 100 kHz for fast input (HSC mode) A/B signal at 50 kHz for fast input (HSC mode) |
| Conversion time | 1 ms per channel + 1 controller cycle time for analog input |
| Counting input number | 4 fast input (HSC mode) (counting frequency: 100 kHz), counting capacity: 32 bits |
| Current state 0 guaranteed | <= 1 mA for input |
| Current state 1 guaranteed | >= 2.5 mA for input |
| Data backed up | 256 kB built-in flash memory for backup of programs |
| Data storage equipment | 2 GB SD card optional |
| Depth | 70 mm |
| Discrete I/O number | 32 |
| Discrete input current | 4.5 mA for fast input 7 mA for input |
| Discrete input logic | Sink or source (positive/negative) |
| Discrete input number | 16 discrete input conforming to IEC 61131-2 Type 1 including 4 fast input |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Discrete output current | 0.1 A |
| Discrete output logic | Positive logic (source) |
| Discrete output number | 16 transistor including 2 fast output |
| Discrete output type | Transistor |
| Discrete output voltage | 24 V DC |
| Exct time for event task | 60 µs response time |
| Execution time for 1 KInstruction | 0.7 ms for other instruction 0.3 ms for event and periodic task |
| Execution time per instruction | 0.2 µs Boolean |
| Height | 90 mm |
| Immunity to microbreaks | 10 ms |
| Input impedance | 4.9 kOhm for fast input 3.4 kOhm for input 100 kOhm for analog input |
| Electrical connection | HE-10 connector, 20 terminal(s) for outputs HE-10 connector, 20 terminal(s) for inputs Mini B USB 2.0 connector for a programming terminal Connector, 4 terminal(s) for analogue inputs Terminal block, 3 terminal(s) for connecting the 24 V DC power supply |
| Electromagnetic emission | Radiated emissions conforming to EN/IEC 55011 class A 10 m, 230 MHz...1 GHz : 47 dB?V/m QP Radiated emissions conforming to EN/IEC 55011 class A 10 m, 30...230 MHz : 40 dB?V/m QP Conducted emissions conforming to EN/IEC 55011 power lines, 1.5...30 MHz : 6 |
| Inrush current | <= 35 A |
| Insulation | Non-insulated between analogue inputs Non-insulated between analogue input and internal logic 500 V AC between output and internal logic Non-insulated between inputs 500 V AC between fast input and internal logic 500 V AC between input and internal logic |
| Integrated connection type | Ethernet with connector RJ45 Non isolated serial link "serial 1" with connector RJ45 and interface RS232/RS485 USB port with connector mini B USB 2.0 |
| IP degree of protection | IP20 with protective cover in place |
| Leakage current | 0.1 mA for transistor output |
| Local signalling | Ethernet network link yellow for Link (Link Status) Ethernet network activity green for ACT 1 LED green for SL 1 LED per channel green for I/O state 1 LED red for BAT 1 LED green for SD card access (SD) 1 LED red for module error (ERR) 1 LED green for RUN |
| LSB value | 10 mV |
| Marking | CE |
| Maximum size of object areas | 512 %M memory bits 8000 %MW memory words 512 %KW constant words 255 %TM timers 255 %C counters |
| Mechanical durability | >= 20000000 cycles for transistor output |
| Memory capacity | 640 kB for system memory RAM 256 kB for program with 10000 instructions |
| Mounting support | Plate or panel with fixing kit Top hat type TH35-7.5 rail conforming to IEC 60715 Top hat type TH35-15 rail conforming to IEC 60715 |
| Number of I/O expansion module | <= 7 with <= 96 discrete output(s) for relay output |
| Operating altitude | 0...2000 m |
| Output frequency | 100 kHz for fast output (PWM/PLS mode) at Q0...Q1 termnal |
| Permitted overload on inputs | +/- 15 V DC for analog input permanent +/- 30 V DC for analog input with 5 min maximum |
| Pollution degree | <= 2 |
| Port Ethernet | 10BASE-T/100BASE-TX 1 port with 100 m copper cable |
| Positioning functions | PWM/PLS function 2 channel(s) (positioning frequency: 100 kHz) |
| Power consumption in W | <= 4.2 W at 24 V without I/O expansion module <= 23.2 W at 24 V with max number of I/O expansion module |
| Power supply output current | 0.47 A at 24 V for expansion bus 0.52 A at 5 V for expansion bus |
| Product certifications | CSA CULus IACS E10 RCM |
| Product end of life instructions | Available Download End of life manual |
| Product environmental profile | Available Download Product environmental |
| Product or component type | Logic controller |
| Product weight | 0.27 kg |
| Protection type | Short-circuit protection on output Short-circuit and overload protection with automatic reset Overload and short-circuit protection at 1.3 A |
| Range of product | Modicon M221 |
| REACh | Reference contains SVHC above the threshold - Go to CaP for more details |
| Realtime clock | With |
| Regulation loop | Adjustable PID regulator up to 14 simultaneous loops |
| Relative humidity | 10...95 % without condensation in storage 10...95 % without condensation in operation |
| Reset time | 1 s automatic reset |
| Resistance to conducted disturbances, induced by radio frequency fields | 10 Vrms (spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz)) conforming to Marine specification (LR, ABS, DNV, GL) 3 Vrms (0.1...80 MHz) conforming to Marine specification (LR, ABS, DNV, GL) 10 Vrms (0.15...80 MHz) conforming to EN/IEC 61000 |
| Resistance to electromagnetic fields | 1 V/m ( 2 GHz...3 GHz) conforming to EN/IEC 61000-4-3 3 V/m ( 1.4 GHz...2 GHz) conforming to EN/IEC 61000-4-3 10 V/m ( 80 MHz...1 GHz) conforming to EN/IEC 61000-4-3 |
| Resistance to electrostatic discharge | 4 kV on contact conforming to EN/IEC 61000-4-2 8 kV in air conforming to EN/IEC 61000-4-2 |
| Resistance to fast transients | 1 kV for serial link conforming to EN/IEC 61000-4-4 1 kV for Ethernet line conforming to EN/IEC 61000-4-4 1 kV for I/O conforming to EN/IEC 61000-4-4 2 kV for relay output conforming to EN/IEC 61000-4-4 2 kV for power lines conforming to EN/IEC 61000-4-4 |
| Resistance to magnetic fields | 30 A/m at 50...60 Hz conforming to EN/IEC 61000-4-8 |
| Response time | 10 ms turn-off operation for output 10 ms turn-on operation for output 5 µs turn-off operation for fast input 5 µs turn-on operation for fast input 100 µs turn-off operation for input; I8...I15 terminal 100 µs turn-on operation for input; I8...I15 termina |
| RoHS (date code: YYWW) | Compliant - since 1348 - Schneider Electric declaration of conformity |
| Shock resistance | 15 gn (test wave duration:11 ms) |
| Standards | EN/IEC 61131-2 EN/IEC 61010-2-201 |
| Storage altitude | 0...3000 m |
| Supply | Serial 1 serial link supply at 5 V 200 mA |
| Supply voltage limits | 19.2...28.8 V |
| Surge withstand | 1 kV for relay output in differential mode conforming to EN/IEC 61000-4-5 1 kV for power lines (AC) in differential mode conforming to EN/IEC 61000-4-5 0.5 kV for power lines (DC) in differential mode conforming to EN/IEC 61000-4-5 1 kV for shielded cable |
| Sustainable offer status | Green Premium product |
| Transmission rate | 480 Mbit/s - communication protocol: USB 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS232 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS485 |
| Tungsten load | <= 12 W for output and fast output |
| Vibration resistance | 3 gn (vibration frequency: 8.4...150 Hz) on panel mounting 3.5 mm (vibration frequency: 5...8.4 Hz) on panel mounting 3 gn (vibration frequency: 8.4...150 Hz) on symmetrical rail 3.5 mm (vibration frequency: 5...8.4 Hz) on symmetrical rail |
| Voltage drop | <= 1 V |
| Voltage state 0 guaranteed | <= 5 V for input |
| Voltage state1 guaranteed | >= 15 V for input |
| Width | 70 mm |
