 |
| [Us] rated supply voltage | 24 V DC, limits = 18...32 V 12 V DC, limits = 9...16 V |
| Ambient air temperature for operation | -40...110 °C |
| Ambient air temperature for storage | -55...155 °C conforming to EN/IEC 60068-2-1 & 2 |
| Analogue input number | 7 |
| Analogue input range | 0...5 V |
| Backup type | External battery with key switch mechanism |
| Bus type | CANopen conformity class: M10 |
| Complementary function | Event processing PID |
| Counting input number | 1 channel(s) at 10000 Hz 16 bits or 32 bits |
| Current consumption | 4000 mA at state 1 1000 mA at state 0 |
| Cycle time | 2...150 ms |
| Discrete input number | 2 sink for I0.11 to I0.12 11 source for I0.0 to I0.10 |
| Discrete input voltage | 12 V 24 V |
| Discrete input voltage type | DC |
| Discrete output number | 6 for sink, output current = 300 mA at 24 V 14 for sink, output current = 300 mA at 12 V 1 for source, output current = 50 mA 1 for source, output current = 1000 mA |
| Electrical connection | 1 male connector 70 pin(s) |
| Environmental characteristic | EMC directive conforming to 89/336/EEC Low voltage directive conforming to EN/IEC 61131-2 (e marking) Low voltage directive conforming to 93/68/EEC Low voltage directive conforming to 73/23/EEC EMC directive conforming to EN/IEC 61131-2 EMC directive conf |
| Exact time for 1 K instruction | 10 ms |
| Filter time | 0, 3 or 12 ms by configuration at state 1 0, 3 or 12 ms by configuration at state 0 |
| Inrush current | <= 50 A for power supply |
| Integrated connection type | Serial link Modbus/character mode master/slave RTU/ASCII RS485 half duplex, 38,4 kbit/s CAN port CANopen/CAN J1939 master, 250...500 kbit/s |
| IP degree of protection | IP67 conforming to EN/IEC 60529 |
| Marking | CE |
| Maximum permissible voltage | 32 V |
| Memory description | Internal RAM, 3000 internal words Internal RAM, 256 internal bits Internal RAM, 128 timers Internal RAM, 128 counters |
| Name of test | Voltage dips and pick-ups conforming to EN/IEC 61131-2 Thermal shocks when not operating conforming to EN/IEC 60068-2-14 Na Surge conforming to EN/IEC 61131-2 zone B Surge conforming to EN/IEC 61000-6-2 Surge conforming to EN/IEC 61000-4-5 Sinusoidal vibr |
| Number of slave | <= 16 for CANopen |
| Object variables | 32 PGN in read/write mode, CAN J1939 16 PDO in write mode, CANopen 16 PDO in read mode, CANopen |
| Operating altitude | 0...3600 m |
| PLC scan | Normal Periodic |
| Power consumption | <= 96 W |
| Power supply type | Battery |
| Product certifications | CSA UL |
| Product or component type | Extreme base controller |
| Product weight | 1.3 kg |
| Program memory | 3000 instructions |
| Pulse width modulation input | 1 PWM at 10000 Hz, accuracy: 0,01 1 analogue input or PWM 0...5 V at 90...600 Hz, accuracy: 1 % |
| Pulse width modulation output | 2 PWM/PLS at 10...1000 Hz 1 PWM/PLS at 10...5000 Hz |
| Range of product | Twido |
| Relative humidity | 90 % without condensation conforming to EN/IEC 60068-2-30 |
| Resistance to chemical agents | Antifreeze Cleaning agent Fuel oil Hydraulic oil Motor oil SAE J1455 chemical substances Solvent |
| System overhead | 0.7 ms |
