 |
| [Ithe] conventional enclosed thermal current | 12 A |
| [Ui] rated insulation voltage | 600 V conforming to CSA 400 V (degree of pollution: 3) conforming to IEC 60947-1 for emergency stop contact |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-1 |
| Ambient air temperature for operation | -25...70 °C |
| Ambient air temperature for storage | -40...70 °C |
| Cable entry | Rubber sleeve with stepped entry, cable outer diameter: 10...22 mm |
| Class of protection against electric shock | Class II conforming to IEC 61140 |
| Connections - terminals | Screw clamp terminals, connection capacity: 2 x 1.5 mm² with or without cable end Screw clamp terminals, connection capacity: 1 x 2.5 mm² with or without cable end |
| Contact block name | XESD1191 for reversing operation XACS3991 for emergency stop |
| Contacts operation | Snap action |
| Control button type | Third push-button, 2-pole right, slow Fourth push-button, 2-pole left, slow Second push-button, 2-pole lower, slow First push-button, 2-pole raise, slow Stop push-button Ø 40 mm 3 NC, latching |
| Control station application | Control of single speed hoist motor |
| Control station colour | Yellow |
| Control station composition | 4 pushbuttons + 1 emergency stop |
| Control station name | XACB |
| Control station type | Double insulated |
| Electrical circuit type | Power circuit |
| Electrical durability | 800000 cycles AC-4, 1500 W at 400 V, operating rate = 10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A 800000 cycles AC-3, 1500 W at 400 V, operating rate = 10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A 500000 cycles A |
| Enclosure material | Glass reinforced polyester |
| Enclosure type | Complete ready for use |
| IP degree of protection | IP65 conforming to IEC 60529 |
| Mechanical durability | 1000000 cycles |
| Mechanical interlocking | With mechanical interlocking between pairs |
| Operating force | 40 N for emergency stop 17 N for push-button |
| Product certifications | CSA type 4 |
| Product or component type | Pendant control station |
| Product weight | 1.35 kg |
| Protective treatment | TH |
| Range of product | Harmony XAC |
| Rated operational power in W | 2200 W AC-4 at 400 V conforming to IEC 60947-3 appendix A 2200 W AC-4 at 240 V conforming to IEC 60947-3 appendix A 2200 W AC-3 at 400 V conforming to IEC 60947-3 appendix A 2200 W AC-3 at 240 V conforming to IEC 60947-3 appendix A |
| Rated power in hp | 5 hp at 400 V, CSA certified 3 hp at 600 V, CSA certified 2 hp at 240 V, CSA certified |
| Shock resistance | 100 gn conforming to IEC 60068-2-27 |
| Short circuit protection | <= 10 A fuse protection by cartridge fuse type aM |
| Standards | EN/IEC 60204-32 EN/IEC 60947-5-1 UL 508 CSA C22.2 No 14 |
| Terminal identifier | (11-12)NC (13-14)NO |
| Terminals description ISO n°1 | (13-14)NO (23-24)NO (33-34)NO (43-44)NO |
| Terminals description ISO n°2 | (11-12)NC (21-22)NC (31-32)NC |
| Vibration resistance | 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 |
