incremental encoder Ø 90 - solid shaft 12 meter - 2500 points - push-pull
| Varenr: | XCC1912PS25KN |
| El nr: | 7524821111 |
| EAN13 nr: | 3389119015196 |
| Pakning: | 1stk |
 |
| [Us] rated supply voltage | 11...30 V DC |
| Ambient air temperature for operation | -20...80 °C |
| Ambient air temperature for storage | -30...85 °C |
| Base material | Aluminium |
| Current consumption | 0...75 mA (no-load) |
| Diameter | 90 mm |
| Electrical connection | 1 male connector M23 radial 12 pins |
| Enclosure material | Zamak |
| Encoder name | XCC |
| Encoder type | Incremental encoder |
| IP degree of protection | IP66 conforming to IEC 60529 |
| Marking | CE |
| Maximum load | 20 daN radial 10 daN axial |
| Maximum output current | 40 mA |
| Maximum revolution speed | 6000 rpm |
| Number of channels | 3 |
| Output frequency | 100 kHz |
| Output level | High level: V supply - 3 V minimum (20 mA) Low level: 1.5 V maximum (20 mA) |
| Output stage | Type K |
| Product specific application | - |
| Product weight | 1.36 kg |
| Protection type | Reverse polarity protection Short-circuit protection |
| Range of product | OsiSense XCC |
| Residual ripple | 0...500 mV |
| Resistance to electromagnetic fields | 10 V/m level 3 conforming to IEC 61000-4-3 |
| Resistance to electrostatic discharge | 8 kV (air discharge) level 3 conforming to IEC 61000-4-2 4 kV (contact discharge) level 3 conforming to IEC 61000-4-2 |
| Resistance to fast transients | 2 kV (power ports) level 3 conforming to IEC 61000-4-4 1 kV (signal ports) level 3 conforming to IEC 61000-4-4 |
| Resolution | 2500 points |
| RoHS | Compliant - since 0701 - Schneider Electric declaration of conformity |
| Shaft diameter | 12 mm |
| Shaft material | Stainless steel |
| Shaft moment of inertia | 150 g.cm² |
| Shaft tolerance | G6 |
| Shaft type | Solid shaft |
| Shock resistance | 30 gn for 11 ms conforming to IEC 60068-2-27 |
| Surge withstand | 1 kV, level 2 conforming to IEC 61000-4-5 |
| Sustainable offer status | Not Green Premium product |
| Torque value | 0.01 N.m |
| Type of ball bearings | 6001ZZ |
| Type of output stage | Driver push-pull |
| Vibration resistance | 10 gn (f = 10...1000 Hz) conforming to IEC 60068-2-6 |
Yderliger oplysninger:
Se venligst SE katalog©Schneider Electric A/S 2025
