 |
| [Ithe] conventional enclosed thermal current | 3 A AC |
| [Ui] rated insulation voltage | 300 V conforming to CSA C22.2 No 14 400 V, pollution degree: 3 conforming to IEC 60947-1 300 V conforming to UL 508 |
| [Uimp] rated impulse withstand voltage | 4 kV conforming to IEC 60947-1 4 kV conforming to IEC 60664 |
| Ambient air temperature for operation | -20...60 °C |
| Body material | Zamak |
| Body type | Fixed |
| Cable composition | 9 x 0.34 mm² |
| Cable length | 5 m |
| Class of protection against electric shock | Class I conforming to NF C 20-030 Class I conforming to IEC 61140 |
| Contact code designation | R300, DC-13 (250 V, Ie = 0.1 A) conforming to IEC 60947-5-1 appendix A R300, DC-13 (250 V, Ie = 0.1 A) conforming to EN 60947-5-1 C300, AC-15 (240 V, Ie = 0.75 A) conforming to IEC 60947-5-1 appendix A C300, AC-15 (240 V, Ie = 0.75 A) conforming to EN 609 |
| Contacts insulation form | Zb |
| Contacts operation | Snap action |
| Contacts type and composition | 2 x (1 NC + 1 NO) |
| Depth | 16 mm |
| Device short name | XCMD |
| Dust zone | Zone 21 - 22 |
| Electrical connection | Fixed cable |
| Electrical durability | 5000000 cycles DC-13 120 V 1 W, <= 3600 cyc/mn load factor: 0.5 conforming to IEC 60947-5-1 appendix C inductive DC 5000000 cycles DC-13 48 V 2 W, <= 3600 cyc/mn load factor: 0.5 conforming to IEC 60947-5-1 appendix C inductive DC 5000000 cycles DC-13 24 |
| Fixing mode | By the head |
| Head material | Zamak |
| Head type | M12 plunger head |
| Height | 50 mm |
| IP degree of protection | IP67 conforming to IEC 60529 IP66 conforming to IEC 60529 |
| Marking | II2 D-Ex tb IIIC T85°C Db IP66/67 |
| Material | Metal |
| Maximum actuation speed | 0.5 m/s |
| Mechanical durability | 10000000 cycles |
| Minimum actuation speed | 0.01 m/min |
| Minimum force for tripping | 8.5 N |
| Movement of operating head | Linear |
| Number of poles | 4 |
| Number of steps | 1 |
| Positive opening | With |
| Positive opening minimum force | 42.5 N |
| Product certifications | INERIS 04ATEX0014X |
| Product end of life instructions | Available Download End of life manual |
| Product environmental profile | Available Download Product environmental |
| Product or component type | Limit switch |
| Protective treatment | TC |
| Range of product | OsiSense ATEX D |
| Resistance across terminals | <= 25 MOhm conforming to IEC 60255-7 category 3 |
| RoHS | Compliant - since 1001 - Schneider Electric declaration of conformity |
| Sensor design | Miniature |
| Series name | Standard format |
| Shock resistance | 25 gn for 18 ms conforming to IEC 60068-2-27 |
| Short circuit protection | 6 A cartridge fuse, type gG |
| Standards | Directive ATEX 94/9/EC EN/IEC 60079-0 EN/IEC 60079-31 |
| Sustainable offer status | Not Green Premium product |
| Switch actuation | On end |
| Type of approach | Vertical approach, 1 direction |
| Type of operator | Metal spring return plunger |
| Vibration resistance | 5 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 |
| Width | 30 mm |
| Wire insulation material | PvR |
