 |
| [Uimp] rated impulse withstand voltage | 0.5 kV |
| [Us] rated supply voltage | 12/24 V DC, voltage limits: 8...33 V |
| Adjustable range of switching point on falling pressure | 1.2...24.2 bar |
| Adjustable range of switching point on rising pressure | 2...25 bar |
| Ambient air temperature for operation | -15...85 °C |
| Ambient air temperature for storage | -40...85 °C |
| Controlled fluid | Fresh water (0...125 °C) Hydraulic oil (-15...125 °C) Corrosive fluid (-15...125 °C) Air (-15...125 °C) |
| Current consumption | < 4 mA |
| Destruction pressure | 62.5 bar |
| Diameter | 22.8 mm |
| Discrete output type | Solid state PNP, 1 NC |
| Drift of the sensitivity | +/- 0.015 % of measuring range/°C |
| Drift of the zero point | +/- 0.015 % of measuring range/°C |
| Electrical circuit type | Control circuit |
| Electrical connection | Quickon type quick coupling |
| Fluid connection type | G 1/4A (male) conforming to ISO 228 |
| Height | 85 mm |
| IP degree of protection | IP67 conforming to EN/IEC 60529 IP66 conforming to EN/IEC 60529 |
| Local display | Without |
| Materials in contact with fluid | Ceramic FPM PPS Stainless steel type AISI 303 |
| Maximum permissible accidental pressure | 56 bar |
| Maximum switching current | 150 mA |
| Measurement accuracy | +/- 1 % of the measuring range |
| Mechanical durability | >= 10000000 cycles |
| NEMA degree of protection | NEMA 4 |
| Operating position | Any position |
| Possible differential maximum at high setting | 23.8 bar |
| Possible differential minimum at high setting | 0.75 bar |
| Possible differential minimum at low setting | 0.75 bar |
| Pressure sensor name | XMLG |
| Pressure sensor size | 25 bar |
| Pressure sensor type | Electronic pressure sensor |
| Product certifications | CSA UL |
| Product or component type | Electronic pressure sensors |
| Product weight | 0.095 kg |
| Protection type | Load short-circuit Reverse polarity |
| Protective treatment | TC |
| Quantity per set | Set of 25 |
| Range of product | OsiSense XM |
| Repeat accuracy | +/- 0.1 % of the measuring range |
| Resistance to conducted disturbances, induced by radio frequency fields | 30 V (0.15...80 Hz) conforming to EN/IEC 61000-4-6 |
| Resistance to electromagnetic fields | 200 V/m (80...1000 Hz) conforming to EN/IEC 61000-4-3 |
| Resistance to electrostatic discharge | 8 kV (on contact) conforming to EN/IEC 61000-4-2 15 kV (in air) conforming to EN/IEC 61000-4-2 |
| Resistance to fast transients | 4 kV conforming to EN/IEC 61000-4-4 |
| Resistance to magnetic fields | 30 A/m (50 Hz) conforming to EN/IEC 61000-4-8 |
| Response time on output | < 2 ms |
| RoHS | Compliant - since 0627 - Schneider Electric declaration of conformity |
| Setting | Factory setting |
| Shock resistance | 25 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Standards | CE EN 50081-1 EN 50082-2 EN 61000-6-2 EN/IEC 60947-1 EN/IEC 60947-5-1 |
| Surge withstand | 500 kV (12 Ohm) conforming to EN/IEC 61000-4-5 1 kV (42 Ohm) conforming to EN/IEC 61000-4-5 |
| Sustainable offer status | Not Green Premium product |
| Type of output signal | Discrete |
| Type of packing | Group |
| Vibration resistance | 20 gn (f = 9...2000 Hz) conforming to EN/IEC 60028-2-6 |
