Induktiv sensor XS1 M5 - L29mm - rustfrit - Sn0.8mm - 5..24VDC - kabel 5 meter
Varenr: XS1N05PB311L1
Produktet findes ikke i SAP!
 |
| [Sn] nominal sensing distance | 0.8 mm |
| [Us] rated supply voltage | 5...24 V DC |
| Ambient air temperature for operation | -25...70 °C |
| Ambient air temperature for storage | -40...85 °C |
| Body type | Fixed |
| Cable composition | 3 x 0.11 mm˛ |
| Cable length | 5 m |
| Current consumption | 0...10 mA at no-load |
| Delay first up | <= 5 ms |
| Delay recovery | <= 1 ms |
| Delay response | <= 1 ms |
| Detection face | Frontal |
| Detector flush mounting acceptance | Flush mountable |
| Discrete output function | 1 NC |
| Discrete output type | PNP |
| Electrical connection | Cable |
| Enclosure material | Stainless steel 303 |
| Front material | PPS |
| IP degree of protection | IP67 conforming to IEC 60529 |
| Length | 29 mm |
| Marking | CE |
| Material | Stainless steel |
| Operating zone | 0...0.6 mm |
| Output circuit type | DC |
| Product certifications | CSA UL |
| Product specific application | - |
| Range of product | OsiSense XS |
| Sensor design | Cylindrical M5 |
| Sensor name | XS1 |
| Sensor type | Inductive proximity sensor |
| Series name | General purpose |
| Shock resistance | 50 gn for 11 ms conforming to IEC 60068-2-27 |
| Size | 29 mm |
| Status LED | 1 LED yellow for output state |
| Supply voltage limits | 5...30 V DC |
| Switching capacity in mA | <= 100 mA with overload and short-circuit protection |
| Switching frequency | <= 5000 Hz |
| Thread type | M5 x 0.5 |
| Threaded length | 29 mm |
| Type of output signal | Discrete |
| Vibration resistance | 25 gn amplitude = +/- 2 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 |
| Voltage drop | <= 2 V at closed state |
| Wire insulation material | PvR |
| Wiring technique | 3-wire |
Yderliger oplysninger:
Se venligst SE katalog©Schneider Electric A/S 2025
