Fotoelektrisk sensor - XU2 - thru beam - 90° - Sn15 mm - 24..240 V AC/DC - cab. 5 meter

Varenr: XU2M18MB230WL5
Produktet findes ikke i SAP!

[Sn] nominal sensing distance	15 m thru beam
[Us] rated supply voltage	24...240 V AC/DC
Add on output	Without
Ambient air temperature for operation	-25...55 °C
Ambient air temperature for storage	-40...70 °C
Cable length	5 m
Delay first up	< 300 ms
Delay recovery	< 20 ms
Delay response	< 20 ms
Detection system	Thru beam
Diameter	18 mm
Discrete output function	1 NC
Electrical connection	Cable
Electronic sensor type	Photo-electric sensor
Emission	Infrared thru beam
Enclosure material	Nickel plated brass
IP degree of protection	IP67 double insulation conforming to IEC 60529
Kit composition	Transmitter + receiver XU2M18MC230WL5T + XU2M18MB230WL5R
Length	97 mm
Lens material	PMMA
Line of sight type	90° lateral
Material	Metal
Maximum sensing distance	20 m
Output type	Solid state
Product certifications	CE CSA UL
Product specific application	-
Range of product	OsiSense XU
Residual current	< 1.5 mA (open state)
Sensor design	Cylindrical M18
Sensor name	XU2
Series name	General purpose single mode
Setting-up	Sensitivity adjustment
Shock resistance	30 gn (duration = 11 ms) conforming to IEC 60068-2-27
Status LED	1 LED (red) for instability 1 LED (yellow) for output state
Supply circuit type	AC/DC
Supply voltage limits	20...264 V AC/DC
Switching capacity in mA	10...200 mA (to be used with 0.4 A quick-blow fuse in series with the load)
Switching frequency	<= 25 Hz
Type of output signal	Discrete
Vibration resistance	7 gn, amplitude = +/- 1.5 mm (f = 10...55 Hz) conforming to IEC 60068-2-6
Voltage drop	6 V (closed state)
Wire insulation material	PvR
Wiring technique	2-wire

Yderliger oplysninger: Se venligst SE katalog

Katalog

Hjem Info