Fotoelektrisk sensor - XU2 - thru beam - 90° - Sn15 mm - 12..24VDC - kabel 5 meter

Varenr: XU2N18PP341WL5
Produktet findes ikke i SAP!

[Sn] nominal sensing distance	15 m thru beam
[Us] rated supply voltage	12...24 V DC with reverse polarity protection
Add on input	Breaking test + programming
Add on output	Without
Ambient air temperature for operation	-25...55 °C
Ambient air temperature for storage	-40...70 °C
Cable composition	4 x 0.34 mm˛
Cable length	5 m
Cable outer diameter	4.2 mm
Current consumption	<= 50 mA (no-load)
Delay first up	<= 15 ms
Delay recovery	<= 1 ms
Delay response	<= 1 ms
Detection system	Thru beam
Diameter	18 mm
Discrete output function	1 NO or 1 NC programmable
Discrete output type	NPN
Electrical connection	Cable
Electronic sensor type	Photo-electric sensor
Emission	Infrared thru beam
Enclosure material	Stainless steel : 304 CU
IP degree of protection	IP67 conforming to IEC 60529
Kit composition	Transmitter + receiver
Length	78 mm
Lens material	PMMA
Line of sight type	90° lateral
Material	Stainless steel
Maximum sensing distance	20 m
Output type	Solid state
Product certifications	CE CSA UL
Product specific application	-
Range of product	OsiSense XU
Sensor design	Cylindrical M18
Sensor name	XU2
Series name	Application food and beverage
Setting-up	Without sensitivity adjustment
Shock resistance	30 gn (duration = 11 ms) conforming to IEC 60068-2-27
Status LED	1 LED (yellow) for output state 1 LED (green) for supply on
Supply circuit type	DC
Supply voltage limits	10...30 V DC
Switching capacity in mA	<= 100 mA (overload and short-circuit protection)
Switching frequency	<= 500 Hz
Type of output signal	Discrete
Vibration resistance	25 gn, amplitude = +/- 1.5 mm (f = 10...55 Hz) conforming to IEC 60068-2-6
Voltage drop	<= 1.5 V (closed state)
Wire insulation material	PvR
Wiring technique	3-wire

Yderliger oplysninger: Se venligst SE katalog

Katalog

Hjem Info