(Foto midi modt.30m NPN no 10m kabel
| Varenr: | XUK2ANANL10R |
| El nr: | 7524803139 |
| EAN13 nr: | 3389110161298 |
| Pakning: | 1stk |
 |
| [Sn] nominal sensing distance | 30 m thru beam need a transmitter XUK2AKSNL10T |
| [Us] rated supply voltage | 12...24 V DC with reverse polarity protection |
| Add on output | Without |
| Ambient air temperature for operation | -25...55 °C |
| Ambient air temperature for storage | -40...70 °C |
| Cable length | 10 m |
| Current consumption | <= 35 mA (no-load) |
| Delay first up | < 15 ms |
| Delay recovery | < 2 ms |
| Delay response | < 2 ms |
| Depth | 50 mm |
| Detection system | Thru beam |
| Discrete output function | 1 NO |
| Discrete output type | NPN |
| Electrical connection | Cable |
| Electronic sensor type | Photo-electric sensor receiver |
| Emission | Infrared thru beam |
| Enclosure material | PBT |
| Height | 50 mm |
| IP degree of protection | IP65 double insulation conforming to IEC 60529 |
| Lens material | PMMA |
| Material | Plastic |
| Maximum sensing distance | 45 m thru beam |
| Output type | Solid state |
| Product certifications | CE CSA UL |
| Product specific application | - |
| Range of product | OsiSense XU |
| Sensor design | Compact 50 x 50 |
| Sensor name | XUK |
| Series name | General purpose single mode |
| Setting-up | Without sensitivity adjustment |
| Shock resistance | 30 gn (duration = 11 ms) conforming to IEC 60068-2-27 |
| Status LED | 1 LED (yellow) for output state |
| Supply circuit type | DC |
| Supply voltage limits | 10...36 V DC |
| Switching capacity in mA | <= 100 mA (overload and short-circuit protection) |
| Switching frequency | <= 250 Hz |
| Type of output signal | Discrete |
| Vibration resistance | 7 gn, amplitude = +/- 1.5 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 |
| Voltage drop | <= 1.5 V (closed state) |
| Width | 18 mm |
| Wire insulation material | PVC |
| Wiring technique | 3-wire |
Yderliger oplysninger:
Se venligst SE katalog©Schneider Electric A/S 2025
