ultrasonic sensor - M30 - diffuse - Sn 1 meter - 4..20 mA - 250 meters - M12
Varenr: XX930A1A2230M12
Produktet findes ikke i SAP!
 |
| [Sa] assured operating distance | 0.051...0.991 m (teach mode) |
| [Sd] sensing range | 0.051...0.991 m |
| [Sn] nominal sensing distance | 1 m adjustable with teach push-button |
| [Us] rated supply voltage | 15...24 V DC with reverse polarity protection |
| Ambient air temperature for operation | 0...50 °C |
| Ambient air temperature for storage | -40...80 °C |
| Analogue output function | 4...20 mA |
| Beam angle | 10 ° |
| Blind zone | 0...51 mm |
| Current consumption | 80 mA |
| Delay first up | 720 ms |
| Delay recovery | 25 ms |
| Delay response | 250 ms |
| Depth | 85 mm |
| Detection system | Diffuse |
| Deviation angle from 90° of object to be detected | -8...8 ° |
| Electrical connection | Male connector M12 4 pins |
| Enclosure material | ULTEM |
| Front material | Silicone |
| Height | 35 mm |
| IP degree of protection | IP65 conforming to IEC 60529 |
| ISO thread | M30 x 1.5 |
| Marking | CE |
| Material | Plastic |
| Maximum switching capacity | 10...500 Ohm with overload and short-circuit protection |
| Minimum size of detected object | Cylinder diameter 1.6 mm up to 635 mm sensing distance |
| Product weight | 0.095 kg |
| Range of product | OsiSense XX |
| Repeat accuracy | 0.9 % |
| Resistance to electromagnetic fields | 10 V/m level 3 conforming to IEC 61000-4-3 |
| Resistance to electrostatic discharge | 8 kV level 4 conforming to IEC 61000-4-2 |
| Resistance to fast transients | 1 kV level 3 conforming to IEC 61000-4-4 |
| Sensor design | Cylindrical M30 |
| Sensor name | XX9 |
| Sensor type | Ultrasonic sensor |
| Series name | General purpose |
| Setting-up | Slope selection using teach button |
| Shock resistance | 30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27 |
| Standards | IEC 60947-5-2 |
| Status LED | 1 LED (green) 1 LED (yellow) 1 LED (dual colour) for setting-up assistance/supply on/output state |
| Supply voltage limits | 10...28 V DC |
| Threaded length | 45 mm |
| Transmission frequency | 200 kHz |
| Type of output signal | Analogue |
| Vibration resistance | +/-1 mm conforming to IEC 60068-2-6 10...55 Hz |
| Width | 35 mm |
| Wiring technique | 4-wire |
Yderliger oplysninger:
Se venligst SE katalog©Schneider Electric A/S 2025
