ultrasonic sensor - M30 - diffuse - Sn2 mm - 4..20 mA - 250 meters - M12

Varenr: XX930A2A2230M12
Produktet findes ikke i SAP!

[Sa] assured operating distance	0.12...2 m (teach mode)
[Sd] sensing range	0.12...2 m
[Sn] nominal sensing distance	2 m adjustable with teach push-button
[Us] rated supply voltage	15...24 V DC with reverse polarity protection
Ambient air temperature for operation	0...50 °C
Ambient air temperature for storage	-40...80 °C
Analogue output function	4...20 mA
Beam angle	10 °
Blind zone	0...120 mm
Current consumption	80 mA
Delay first up	720 ms
Delay recovery	25 ms
Delay response	250 ms
Depth	85 mm
Detection system	Diffuse
Deviation angle from 90° of object to be detected	-8...8 °
Electrical connection	Male connector M12 4 pins
Enclosure material	ULTEM
Front material	Silicone
Height	35 mm
IP degree of protection	IP65 conforming to IEC 60529
ISO thread	M30 x 1.5
Marking	CE
Material	Plastic
Maximum switching capacity	10...500 Ohm with overload and short-circuit protection
Minimum size of detected object	Cylinder diameter 1.6 mm up to 635 mm sensing distance
Product weight	0.095 kg
Range of product	OsiSense XX
Repeat accuracy	0.9 %
Resistance to electromagnetic fields	10 V/m level 3 conforming to IEC 61000-4-3
Resistance to electrostatic discharge	8 kV level 4 conforming to IEC 61000-4-2
Resistance to fast transients	1 kV level 3 conforming to IEC 61000-4-4
Sensor design	Cylindrical M30
Sensor name	XX9
Sensor type	Ultrasonic sensor
Series name	General purpose
Setting-up	Slope selection using teach button
Shock resistance	30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27
Standards	IEC 60947-5-2
Status LED	1 LED (green) 1 LED (yellow) 1 LED (dual colour) for setting-up assistance/supply on/output state
Supply voltage limits	10...28 V DC
Threaded length	45 mm
Transmission frequency	200 kHz
Type of output signal	Analogue
Vibration resistance	+/-1 mm conforming to IEC 60068-2-6 10...55 Hz
Width	35 mm
Wiring technique	4-wire

Yderliger oplysninger: Se venligst SE katalog

Katalog

Hjem Info