 |
| [Sa] assured operating distance | 0.051...0.508 m (teach mode) |
| [Sd] sensing range | 0.051...0.508 m |
| [Sn] nominal sensing distance | 0.5 m adjustable with remote teach push-button |
| [Us] rated supply voltage | 12...24 V DC with reverse polarity protection |
| Ambient air temperature for operation | -20...65 °C |
| Ambient air temperature for storage | -40...80 °C |
| Analogue output function | 0...10 V |
| Beam angle | 6 ° |
| Blind zone | 0...51 mm |
| Current consumption | 40 mA |
| Delay first up | 100 ms |
| Delay recovery | 10 ms |
| Delay response | 15 ms |
| Depth | 18 mm |
| Detection system | Diffuse |
| Deviation angle from 90° of object to be detected | -7...7 ° |
| Electrical connection | Male connector M12 4 pins |
| Enclosure material | Valox |
| Front material | Epoxy |
| Height | 65 mm |
| IP degree of protection | IP67 conforming to IEC 60529 |
| ISO thread | M18 x 1 |
| Marking | CE |
| Material | Plastic |
| Maximum switching capacity | >= 1 kOhm with overload and short-circuit protection |
| Minimum size of detected object | Flat bar 1 mm wide up to 150 mm sensing distance Cylinder diameter 2.5 mm up to 150 mm sensing distance |
| Product end of life instructions | Available Download End of life manual |
| Product environmental profile | Available Download Product environmental |
| Product weight | 0.09 kg |
| Range of product | OsiSense XX |
| Repeat accuracy | 1.27 % |
| Resistance to electromagnetic fields | 10 V/m level 3 conforming to IEC 61000-4-3 |
| Resistance to electrostatic discharge | 8 kV level 4 conforming to IEC 61000-4-2 |
| Resistance to fast transients | 1 kV level 3 conforming to IEC 61000-4-4 |
| RoHS | Compliant - since 1140 - Schneider Electric declaration of conformity |
| Sensor design | Flat form 18 x 33 x 60 + cylindrical M18 |
| Sensor name | XX9 |
| Sensor type | Ultrasonic sensor |
| Series name | General purpose |
| Setting-up | Slope selection using teach button |
| Shock resistance | 30 gn in all 3 axes for 11 ms conforming to IEC 60068-2-27 |
| Standards | IEC 60947-5-2 |
| Status LED | 1 LED (yellow) for output state 1 LED (green) for supply on 1 LED (dual colour) for setting-up assistance |
| Supply voltage limits | 10...28 V DC |
| Sustainable offer status | Green Premium product |
| Threaded length | 20 mm |
| Transmission frequency | 300 kHz |
| Type of output signal | Analogue |
| Vibration resistance | +/-1 mm conforming to IEC 60068-2-6 10...55 Hz |
| Width | 44 mm |
| Wiring technique | 4-wire |
